What bell housing is this ??? ROUND TWO !!!

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

What bell housing is this ??? ROUND TWO !!!

Postby jondee86 » Fri Sep 22, 2017 4:10 pm

Can anyone identify what engine this bell housing would have come from ? It fits the
early 20-spline T-50 with 62mm dia input shaft bearing, but it does not bolt to A-series.

Image

Image

I've goooooogled my ass off, but can't find anything that matches this. Ot did come to
me with a DIY cable shifter conversion bracket bolted on, but I'd say it was from a car
with hydraulic clutch. The only markings anywere are "3-1" in one of the pockets on the
gearbox mounting face.

Cheers... jondee86
Last edited by jondee86 on Mon Oct 23, 2017 12:22 pm, edited 1 time in total.
1984 AE86 Corolla GT Liftback, NZ new... now with GZE
spec small port, twinscrew s/c and water/methanol injection :)

Watch this space >>> <<<
User avatar
jondee86
Toyspeed Member
 
Posts: 903
Joined: Mon Aug 18, 2003 11:08 pm
Location: Wellington

Re: What bell housing is this ???

Postby jondee86 » Sat Sep 23, 2017 12:05 pm

Got it sussed after a bit more looking on the interwebz. It's a T-series bell so maybe
useful to someone. If that's you... let me know :)

Cheers... jondee86
1984 AE86 Corolla GT Liftback, NZ new... now with GZE
spec small port, twinscrew s/c and water/methanol injection :)

Watch this space >>> <<<
User avatar
jondee86
Toyspeed Member
 
Posts: 903
Joined: Mon Aug 18, 2003 11:08 pm
Location: Wellington

Re: What bell housing is this ???

Postby Celica RA45 » Mon Oct 23, 2017 12:24 am

could be a 1s bellhousing looking at it
Celica RA45
Toyspeed Member
 
Posts: 308
Joined: Wed Feb 05, 2003 9:55 pm
Location: melbourne ,aust

Re: What bell housing is this ??? ROUND TWO !!!

Postby jondee86 » Mon Oct 23, 2017 12:48 pm

I.ve got another bell housing to try and identify. This one is proving to be more
difficult to figure out...

Image

Image

Image

The bell has been mofified with a steel plate to match a different gearbox. Going
by the bolt pattern I would guess a W50. A window has been opened up in the side
to accommodate athe clutch fork. The bell looks a little bit like a 4A but it seems
to be a bit smaller and definitely won't fit a 4A.

So if anyone recognises their handiwork or can tell me what engine this this bell
was originally fitted to, I would like to know :)

Cheers... jondee86
1984 AE86 Corolla GT Liftback, NZ new... now with GZE
spec small port, twinscrew s/c and water/methanol injection :)

Watch this space >>> <<<
User avatar
jondee86
Toyspeed Member
 
Posts: 903
Joined: Mon Aug 18, 2003 11:08 pm
Location: Wellington


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 8 guests

Fatal: Not able to open ./cache/data_global.php