Blacktop users, whats your rev limit set to?

[4000GT]

Keen to hear especially from those with cam work...

[Bling]

I like to set mine to 7800rpm, seems to suit my cams.








engine is stock

[RedMist]

I used to run my stock to 8.2k RPM.
The modified ones in offroad racing seem to be able to run to 9K RPM without too many issues.
Forget those stock rods though.

Dont forget that the Link soft cut 200 RPM before the limiter.

[Chickenman]

I used to run my stock to 8.2k RPM.
The modified ones in offroad racing seem to be able to run to 9K RPM without too many issues.
Forget those stock rods though.

Dont forget that the Link soft cut 200 RPM before the limiter.

Is it the rods or the rodbolts that go?

[Mr Revhead]

the rods.

they are fine for street use. but if u use them for motorsport where u need to sit on 7500+ for any length of time its a matter of when not if you end up with this:




the size difference between the two types of 20v rods is like me standing next to you toby

[AceSniper]

if ya need pics of the twigs near silvertop rods say ill go take one, but looking at them I wouldnt wanna push them to much, I have and been lucky... but I slap myself everytime I see what they look like.

[Lloyd]

You've already taken some

[fxgt race]

mine is set at 8800,only really sarts to rev at 7000 and pulls all the way to the rev limiter.sliver top rods and 290odd degree cams

[ROBODISCO_20v]

Mines still set at the factory 7800, Max power is at 7600 according to my last dyno run so no need to rev it much over that anyway.
Although I've manage to get it over 8K once on my sard digital rev counter when I went from 5th to 2nd

[Mr Revhead]

wheres max torque?

[Lloyd]

Someone should change their name to Max Torque

[Santa'sBoostinSleigh]

yay looks like im scoring free silvertop rodness

[ROBODISCO_20v]

wheres max torque?

about 5500rpm