Omori Oil Pressure Gague Wiring

[JamesM]

I have an electrical oil presure gauage (with a sender unit)... i cant seem to get it to work yet.. does anyone have a wiring diagram for one of these.. or know the principle behind how they should be wired.. how they work? etc
oh and same goes for a temperature gauge..

thanks

[Stealer Of Souls]

Number of wires and their colours?

The autogauge brand stuff has two configurations that I've seen.

red/black/orange + red/black/green
being
+12/gnd/illumination + +12 (for sensor)/gnd (for sensor)/sensor

and
red/black/orange/another colour
+12/gnd/illumination/sensor


That'll probably be no help at all... But it might give you some ideas.

[JamesM]

right i got them both working.. but didnt use all the wires... oh well seems to work..

on the temperature gauge there is two wires that come out of the sensor.. i connected one to +12 and the other to one of the wires into guage.. then another wire from gauge to ground and another to my lights switch.. seems to light up fine and also read temp properly.. i think.. and 2 or 3 spare wires coming out of the gauge tho..

pressure gauge used all but 1 wire.. works sweet..