Toyspeed

Just had a look today, I think? I have ruled out a air bubble, I did bleed them with the nipple at the top. No change.

There is a master cylinder for the back and one for the front from what I can see, just behind the pedals, and the bias adjuster changes the stroke on the cylinder push rod ...

Im pretty sure I have them on the right sides, but I will double check.

Was just thinking though I have mounted them parallel to the ground on top.

Do they need to be up down, at a right angle to the ground?

Could there possibly be a air bubble?

Maybe i could vacuum bleed them?

I have replaced the rear drum brakes on my ke25 with discs and calliper of te71, the car has brake bias adjustment fitted to. And pedal box.

they are all fitted and do stop the car but after bleeding 4 times the peddle almost goes to the floor, if you pump the pedal it it does go hard???

The ...

Hey, I'm at the head stage of my smallport rebuild, I was interested in any comments on the size of scim on the head that most people go with. For this sort of build.


The engine is n/a smallport 4age, race car engine, rebuilt balanced block, high comp pistons, .5mm head gasket, mild++ cams ...

Im using the electronic dizzy of a 5k , it works well.

cool thanks now I can get the right bits!

hey, just wondering if anyone knows what these calipers are off. I though they where ae86 but then when i went to get a kit for them the ae86 ones were different. They have cable for hanbrake that operate the pads on the discs and big rubber boots covering the hadbrake mech.. They are rear callipers ...

I got a trd lsd with my car (ke25) when i bought it and the guy told me it would be worth about 800-1000 (second-hand), seems crazy but i suppose if you cant get them anymore?

thanks, what about this setup on trademe? It looks like a pretty good deal?

SOLD 2 ME!!!

cheerr

Hey, Im looking at upgrading my race car from drums to discs. I have a ke25 with ke70 rear end.

I would like to keep this rear end, as I have a lsd that fits, and just add on discs if possible?

Unless anyone knows of complete rear end with same diff!

I would prefer to have a cable ...

I got those clearnces of a random site on the net so.. yeah they could be dodgy, would be wonderful if they could be confirmed.

Ive heard that you should get bearings with the groove right around instead of just half???

Do the trd have this?

cheers samham

Haha, that is true!

Im building the engine for my dedicated 1600 class, race car. High-ish compression N/A, high revs etc.

I mesured with a micrometer and telescope gauge, found the micrometer fine for crank, but using the gauge on the caps was a B@%CH.

I use mesurig gear for my job and ...

Hey,

Im about to get the bearings for my smallport rebuild, and would like some advice from people who have been there done that.

I have mesured and come up with this:

conrod journals 41.99
Conrod: 45.01

main journals 47.99
main 52.01

so then say 52.01-47.99= 4.02- oil clearance ...

Ive got them in my race car, and havnt had any probs with them.

Although Im about 70kgs and theyre a perfect fit. ie made for smaller people!

My mates that 6" 90kg can only just fit in and looks a bit big for the seat.

Was just cleaning up my pistons and it looks like they already have a coating on them? one type of coating on the top? one type on edge?, but none on the skirts?

yip, check on the arp rod bolts and rod/piston balancing.

Whats the advantages of coating piston tops and skirts, how much $ ?

Not to sure about more duration/lift, sort of wanted to stay on a budget, could be costly new valve springs, shim under bucket etc. And not have the power way at the ...

yeah was thinkn to use the smallport head as Ive already got it, mind due never really thought about 20v head(carbs)?

something to think about this lovely labour weelend, in the tropical paridise of parmy!

Howdy,
I'm building up a smallport 4age for race, here's what Im doing/done so far:

smallport
silvertoprods/ pistons?
blacktop flywheel
balanced crank, flywheel, clutch cover, front pully, (cam gears?)
.5mm headgasket
will shave a little off head to bring compression up?
new seals and ...

hey, Im new to parmy, whats a clubsport day? Is that a car club thing or something run by manfield? could be keen to take the rolla for a spin? How do I find out some info?

cheers .sam.

they work sweet against aliens, should do for cats!

m

"The Remote Sentry Weapon Systems are robotic machine guns. You may look at it either as a self-operating portable machine gun or as a single-purpose combat robot. The guns use passive infrared, ambient light, radar and ultrasonic motion ...