by atmosports » Sun May 27, 2007 10:08 pm
Cardwells,Segedins,STA,Pioneer Autoparts,Autoquip,HiTech Motorsport any of them should be able to supply what you need or get it. Try & stick with a decent brand,decent looking one. I'd personally only use a mocal/serck or similar one as I've had to replace plenty of the brand X cheapo ones as they just can't handle the pace. Nothing like losing a motor due to saving $10 on a cheap ass part.
Make sure the one you buy you can get new orings/seals for & that it is the right thread as from memory there is an imperial sized one that is close to a metric one(can't remember which one) & they will screw onto one another & go tight even but they will loosen off under vibration if you get the wrong one(metric for imperial etc), I haven't done this myself but got given one to see why it kept on coming loose & this is what it turned out to be.