Toyspeed.org.nz Message Board

by **Distrb** » Thu Jul 09, 2009 5:13 pm

Who knows where to get some decent coarse bumper mesh? Racepro stuff isnt good enough, even the coarsest stuff is too fine.

Looking at something similar to the factory mesh in the front bumper on: http://razine.com/gallery/gallery2/v/Re ... 7.jpg.html

Surely there must be more choice out there than racepro? Someone please enlighten me.

by **~SlideWays~** » Thu Jul 09, 2009 5:46 pm

Years ago I bought some at Ulrich in Petone. They had lots of options from memory so might be worth a look to see if they have what you need?

by **~SlideWays~** » Thu Jul 09, 2009 5:47 pm

Do you feel enlightened? :lol:

by **GTCRSHR** » Thu Jul 09, 2009 6:25 pm

ulrich aluminum, i got mine from there various grade, can buy a full sheet or a bit

by **Jazza** » Thu Jul 09, 2009 7:25 pm

I got some unbranded stuff from wootens auto elec. Filled a front EG bumper 2x for 30 bucks

by **cat007** » Fri Jul 10, 2009 11:33 am

May sound silly but, have you tried mitre 10, bunnings etc?

They might have something to suit?

by **Distrb** » Fri Jul 10, 2009 11:36 am

yep, had a wander round there. the stuff they had was more suited to a rurual setting as opposed to automotive :lol:

looks like a long lunch trip to ulrich might be in order.

gavin - yes i feel enlightened now :lol:

by **Loudtoy** » Fri Jul 10, 2009 8:41 pm

Distrb wrote:yep, had a wander round there. the stuff they had was more suited to a rurual setting as opposed to automotive

looks like a long lunch trip to ulrich might be in order.

gavin - yes i feel enlightened now

Chicken wire for the win - oh bugger you didn't want a rural fix up looking job

by **MR2BOY23** » Fri Jul 10, 2009 8:51 pm

The stuff we sell at supercheap looks very similar to that picture

by **Stott69** » Fri Jul 10, 2009 10:30 pm

all else fails I could bring some stainless mesh down from work next time

by **Anton** » Wed Jul 22, 2009 5:08 pm

You guys just gave me an idea. The bumper of my Celica has two holes on each side where foglamps should be. Brand new foglamps are expensive and 2nd hand ones for the 2003 model are hard to find. From your posts, I imagined black paint on mesh attached from the inside of the bumper. I don't have time nor the skill for a DIY job, do you where I can have this done properly? Cheers.

Toyspeed.org.nz Message Board

Front bumper mesh

Front bumper mesh

Who is online