by strx7 » Mon Jan 04, 2010 9:51 pm
ahhh HELLO, do a search
pretty much the WHOLE car is different enough that you cant interchange things without having something not fit properly along the lines. (panel wise) from memory the rear bumper is the same, and that is it.
Corolla doors fit under the roof & A Pillar.
Sprinter Doors fit onto the Roof and A Pillar
If you bolt a corolla onto a sprinter/corolla liftback, you will have a wider than normal gap from about half way to the bottom, and as it gets higher up, the gap gets less and less until you need to cut part of the guard off to clear the door, then you'll be left with a small triangular piece at the top where you have nothing at all.
lights, corner lights, bumpers, bonnets etc cann all be BOLTED into the other vehicle but you need to swap the corrosponding parts. On a sprinter, you COULD put corolla headlights, grill and bonnet and leave on the sprinter corner lights and guards and you shouldn't have any fitment issues.
Online Car Forums - Where Hui seems to take preference over Do-ey
HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.
Motorsport Bay of Plenty -
http://www.mbop.org.nz