Good Place to get Cut & Polish done in Auckland?

General discussions on all non technical car related topics

Moderator: The Mod Squad

Good Place to get Cut & Polish done in Auckland?

Postby RobertC » Fri Oct 01, 2010 11:56 pm

Looking for somewhere thats not overly expensive but will still do a reasonable job.

Can someone recommend somewhere to get a full cut and polish done.

Roof is showing some fairly heavy oxidation which I'm hoping will not require re-painting. And pricing getting the front bumper re-painted.

I'm in Auckland the car is an Toyota Levin.

And any idea what this is likely to cost me?



Or would I just be better off buying a polisher and doing it my self? Main thing I was worried about is making it worse.
User avatar
RobertC
Toyspeed Member
 
Posts: 493
Joined: Sat Jun 19, 2010 11:35 am
Location: Auckland

Postby Akane » Sat Oct 02, 2010 2:49 am

The polisher is kinda $$$, a proper one anyway, with variable speed.

You'll need compounds, pads. And a lot of patience.

I did it on my MR2, it went from the famous pink to a bright red.

It's not that hard, if you have half a brain you can pull it off.

http://sphotos.ak.fbcdn.net/hphotos-ak- ... 8513_n.jpg
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland

Postby sergei » Sat Oct 02, 2010 10:06 am

The cost of polisher (entry level) is almost the same as getting it professionally done (not by car groomers - they are hopeless).
So you decide, remember if you are going to do it more than once in 5 years and don't mind a bit of exercise then buying a polisher and diy is a better option.
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby Dell'Orto » Sat Oct 02, 2010 12:07 pm

Yeah, the Hitachi 180mm polisher runs at something like $300 retail. Plus if you're a noob, you can burn the paint.
Take it to a proper painter, they'll do it for a reasonable price.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Akane » Sat Oct 02, 2010 3:22 pm

sergei wrote:So you decide, remember if you are going to do it more than once in 5 years and don't mind a bit of exercise then buying a polisher and diy is a better option.


I am not so sure if you wanna cut the paint on the same car more than once... Gets kinda thin....
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland

Postby tsoob » Sat Oct 02, 2010 3:47 pm

Im an ex car painter, if you need a cut and polish hit me up :)
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 6 guests