Mazda 3/Mazda6 Question

General discussions on all non technical car related topics

Moderator: The Mod Squad

Mazda 3/Mazda6 Question

Postby ee904age » Fri Jul 06, 2012 7:06 pm

After writing off our Commodore Wagon a couple of weeks ago, we are after a new car. Both the better half and me like the look of the newer shape Mazda3/Axela and Mazda6/Atenza. Does anyone have any experience with either of these? We want either a 2L or 2.3L pref in manual up to around $10k.

Anything to look out for when looking at them? Most seem to be in Auckland, but we have a credit owing from AirNZ so travelling is no problem but would like to know what to ask before making a trip.

Also I know it's been asked hundreds of times lately but any suggestions on similar cars would be good. Criteria are: At least 2L, pref manual, big enough for a family of 4 to go away with luggage, better fuel economy than the Commodores ~6km/L. Not keen on Subarus mainly due to the bad rep of the earlier TT's but maybe they've improved?
90 SW20 Turbo - Project
90 SW20 N/A - Sold
User avatar
ee904age
Toyspeed Member
 
Posts: 1388
Joined: Tue Dec 16, 2003 6:27 pm
Location: Wanganui

Postby Dell'Orto » Fri Jul 06, 2012 7:08 pm

Do not get the 2 litre, always go 2.3. Much much better motors.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby mint_86 » Fri Jul 06, 2012 9:49 pm

Ive got a 2.3 manual axela sedan. Goes pretty well. Had it for the last four years. Only things i can think of are i had to do the water pump at around 75k cos it was leaking, and it always chews out the rear tyres from too much camber when its got some weight in the back plus im too useless to get a rear camber kit.
mint_86
Toyspeed Member
 
Posts: 54
Joined: Tue Jan 07, 2003 6:25 pm

Postby Stu- » Fri Jul 06, 2012 9:55 pm

Yeah the 2.3L is the way to go - try to get a 23S and look for one with the Bose stereo
1985 Toyota Starlet EP71 (4agte)
Project Thread
http://garage4ag.wordpress.com
Auto electrical and ecu installation
User avatar
Stu-
Toyspeed Member
 
Posts: 1767
Joined: Wed May 15, 2002 4:17 pm
Location: Hiding from you...

Postby Toby » Fri Jul 06, 2012 10:15 pm

Ours was the slightly older shape I think?

I didn't have a problem with the power delivery of the 2l, towed well and the auto gearbox was still very responsive and... smooth when I last drove it. Alternators have a stupid clutch system that fails every so often (approx 200 000kms before our one did) but otherwise pretty solid.

The chassis itself is good, huge and comfy for decent trips but the sportier 2.3 based version is probably a little better sorted and alloys with decent tyres will always make a difference.

I hated auto trans...
Hated Mazda (bad turbo 323 memories)...

...Mazda 6 changed my mind, Possibly one of the better daily drudgery cars I've driven - not that exciting but competent and our one was very low maintenance.

Non Bose stereo sucks overall... that's a definite consideration if you enjoy a good singalong.

In fact... lol: http://www.trademe.co.nz/motors/used-ca ... 112954.htm Check out those hubcaps!
:D
User avatar
Toby
Toyspeed Member
 
Posts: 552
Joined: Mon Nov 02, 2009 2:56 pm

Postby AE82 FXGT » Fri Jul 06, 2012 10:30 pm

Dell'Orto wrote:Do not get the 2 litre, always go 2.3. Much much better motors.


This, the 2.0 LF motors are average, alright around town if your a nana, but as your after a manual I would say your not :lol: (they even seem average when in an MX5)

The 2.3s are a nice motor, if you want room for a fam then a 6 would be logical, but do look around locally and size up the boot of a 3, some people think it's good enough.

If you get a 6 import, try to get one with a service history or failing that (as most imports don't have one), try to get NZ new as for some reason I have seen about 5 or 6 Mazda Atenza imports that have run bearings due to bad servicing (It is possible to do the main bearings with out taking off the head but would be easier to not do them at all.)

All of the above from being at a Mazda dealer for 5 years.
Previous: '85 AE82 FXGT, '92 AE101 GTZ, '92 AE101 GT-APEX, '04 SE3P RX8, '05 Mazda 6 MPS, '97 NA8C MX5, '03 GSX250, '08 ZX6R, '13 GROM
Current: '07 GRE156 BLADE MASTER G
User avatar
AE82 FXGT
Toyspeed Member
 
Posts: 1594
Joined: Thu Nov 04, 2004 1:51 pm
Location: Lower hutt


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 41 guests