Toyspeed.org.nz Message Board

by **Toymad** » Mon Apr 02, 2007 9:31 am

ronio73 wrote:ok,I finally got mk2 supra parts.I will make the subframe bushings molds this weekend and the poly subframe bushings will be ready in a week's time.The mk2 supra subframe bushings are almost the same as the mk3 supra subframe bushings,so I will making the mk3 subframe bushings too.

Ronnie, are you doing the upper crossmember bushes as well? There is a "beam" which bolts to the top rear of the diff that bolts to the chassis and doubles as a mount for the sway bar.

David

by **ronio73** » Tue Apr 03, 2007 6:42 pm

Sorry,I don't have prices for rear set yet.I will have bushings for the rear done this thusday,by then I will have prices.
Yes,I will doing the upper crossmember bushings as soon as I complete the rear lower bushings.

by **ronio73** » Wed Apr 04, 2007 6:06 pm

does any of you mk2 supra owners have a lower insulator for rear suspension spring.I need to borrow one which is in good condition.I plan to make a polyurethane version.
Ronnie

by **deaf_rattle** » Wed Apr 04, 2007 6:47 pm

i can take the one out from my car this weekend, are both sides the same?

cheers

by **ronio73** » Wed Apr 04, 2007 9:47 pm

thanks man.Not really sure if both sides are the same,because I am not too familiar with the mk2 suspra suspension.
Ronnie

by **deaf_rattle** » Sun Apr 08, 2007 12:20 pm

by **ronio73** » Sat Apr 21, 2007 7:57 pm

ok,price for ma61 subframe bushings and rear control arm bushings is $180.00.
Sorry for long delay guys.
Ronnie

by **big_boy** » Sat Apr 21, 2007 8:32 pm

deaf_rattle wrote:

good to see your wearing your auckland saftey boots there

by **ronio73** » Sat Apr 21, 2007 11:53 pm

That is my 4 year old nephew standing in the background.

by **ronio73** » Mon Jun 11, 2007 7:14 pm

is there still interest in these bushings?.Is the prices too expensive?.
Ronnie

by **spencer** » Mon Jun 11, 2007 8:11 pm

could be keen mate im going to measure up my mx31's independant rear and see if they are the same, its the same setup but could be different. can you put measurements up?

by **Zestripper** » Tue Jun 12, 2007 8:39 pm

Usuall story, I'll be wanting 2 sets, just not yet. Have another project on the go and the 61's wont be getting any love until the end of the year or so.

by **deaf_rattle** » Tue Jun 12, 2007 8:59 pm

Zestripper wrote:Usuall story, I'll be wanting 2 sets, just not yet. Have another project on the go and the 61's wont be getting any love until the end of the year or so.

get your priorities sorted dude :lol:

by **MrDori** » Wed Jun 13, 2007 7:31 pm

whats happnig with these? who do i talk to to get some

by **deaf_rattle** » Wed Jun 13, 2007 8:48 pm

ronnie is the guy to speak to.
ronio73

by **spencer** » Wed Jun 13, 2007 10:37 pm

can someone measure them?

by **ronio73** » Thu Jun 14, 2007 6:06 pm

The bushings are already made up.
I will put up measurements in the weekend.
Ronnie

by **ronio73** » Thu Aug 23, 2007 6:48 pm

How do I put photos on this forum.I have a photo of mk2 supra polyurethane steering bushings.
Ronnie

by **deaf_rattle** » Thu Aug 23, 2007 7:20 pm

Hey ronnie

Email me the pics at m_adair@xtra.co.nz ill put pics up for you

cheers

by **MrDori** » Thu Aug 23, 2007 7:34 pm

im keen for some of these, i need the two main supbframe ones, i have the control arm bushes however the metal sleve is the wrong sixe

Toyspeed.org.nz Message Board

MA61 polyurethane rear suspension parts who wants them

Who is online