Right here we go again! With the US$ holding up above 70 (which is good, considering it was 49c fourteen months ago! [or, parts are 43% cheaper now than then!]) and bulk shipping on the ocean we can offer super deals on any and all products from the USA.
This includes body kits, short blocks, gearboxes, seats, hoods and so on. Such items usually cost no less than $700 in shipping alone to get over here, with our containers even the heaviest items cost no more than a few hundred in shipping. A Hood for example (even though light and thin) is about $550 + Fees for shipping alone from the USA. With our container it's under $200 (in shipping). Even right down to a pair of bump sticks - normally $100 odd to ship - with our containers they're about $15-$20 / pair in shipping!
So, on to the brands and prices!
Seats - Sparco especially!
The Evo series Sparco seats are used everywhere. Rally, track, sprint. Europe, the Americas - everywhere! Most are FIA approved, the street series seats aren't though! The Sparco Chrono and Fighter are the two most popular street seats by miles!
Some indicative prices! Street seats start from $455 ea, Competition seats from $495!
Sparco Evo through to Evo III (small to large) $1049 to $1139
Evo
Pro Adv for Rally / Track from $1295
Chrono from $695
Fighter $825
Harnesses
Sparco harnesses start from $295 (comp) and $135 (street!)
--> Sparco Site: http://www.sparcousa.com/
Helmets and Accessories
Sparco Helmets start from $565 while stocks last (all competition spec!). Accessories also include shift knobs, pedals, gloves, race suits and so on! Just ask!
Aerodynamics!
Often the hardest items to import because they are stupidly light but often so large! Even a 3kg spoiler costs over $500 because they can be near 2m long and the traditional carriers will charge oversized!
APR Performance
Specialists in a) functional aerodynamics and b) carbon fiber. That's a win-win right there!
Front lips from $699
Wide Body Kits from $4200
Front Splitters from $450 with rods
Rear Carbon Diffusers from $970
APR Performance -> http://www.aprperformance.com/index.php ... &Itemid=44
Skunk2!
Skunk2 have moved into Toyota, Subaru and Mitsubishi tinkering recently so there are heaps of options along side the traditional Honda options.
Pro Series Intake Manifolds from $415
Fuel Rails from $275
Coilovers from $1099
Full exhausts from $733
Manifolds from $1212
Suspension Goodies
We got heaps and heaps of options. Even for Euro cars - just ask us. From Ground Control springs and coilovers to Energy Suspension inserts, to Eibach, and even Koni! We also do KW (top grade Euro kits), H&R and Neuspeed! Lets add Tanabe and Tokico to the list also!
These guys
And these:
Also
Intake Kits
AEM, Injen, Fujita, DC, HKS, Apexi - we got it all! Just ask for an application. AEM is well regarded as being one of the most powerful cold air intake kits on the market. From Mazda to Toyota to Subaru, Honda and Mitsubishi!
ACT Clutch and Flywheel
Clutches and flywheels weigh lots, and therefore costs a heap to ship. There's no more than $100 in shipping on any clutch kit, saving around $250 at least! Take a look through all their options:
Japanese list here:
http://www2.advancedclutch.com/products ... _apps.aspx
Full Search Here:
http://www2.advancedclutch.com/home.aspx
Power Slot Brake Rotors
Brake rotors are tantamount to shipping pure lead. They're heavy, cheap to make but super expensive to ship! One rotor from Powerslot on our shipment costs from $299 delivered, rather than $299 alone in just shipping! Cryo treatment available also so just ask!
Limited Options
Some Japanese brands that we represent also operate officially in the USA and we can buy either from them or Japan. Options are available from the likes of 5Zigen, Apexi, Top Fuel and more! Just ask - you never know!
Brake Pads!
The cat is out of the bag - we do EBC and Hawk. People often don't believe the prices! Just ask us, Redstuff is most popular for track work!
Turbochargers
We have been reliably told that Turbonetics is on par with Garrett, without the use of plastic bearing seals (right?) and therefore as the power goes up and up, the turbo doesn't decide to start eating it's components! Ball bearing options available, from 200 to 2000hp!
As you already know there's Wastegates from Turbonetics too. Capable of supporting over 2000hp (dual). There's also wastegates from Synapse (from $430) and they also offer anti-surge blow off valves! Seriously - anything turbo related just ask, we'll chase options!
Last Word
We also ship frequently from Japan with pallets or containers so just ask if you have demands from their brands! RE Amemiya, Fujita Engineering, HKS Hansai, Ganador, ARC, Bride - it's no issue!
Remember - if you are looking at any part not listed, ask. If you got an option lined up from XYZ, we can look at 5 other brand options for you!
Doesn't matter if they're spark plugs, seat fabric, a bolt, carbon sheets, OEM parts, muffler extensions, lines, hand brake buttons - we've probably brought it in before!
Mac
mac@fortyone.co.nz
http://www.fortyone.co.nz
I wish it was an option.
