Toyspeed.org.nz Message Board

by **supradave** » Thu May 24, 2007 1:41 pm

damn, if i had seen the JUN cam gears were cheaper i would have got those instead of AEM ones ;p

never mind haha teach me for being lazy and not looking hard enuff

also, cant really seem to navigate the HKS site its mostly in japanese. Can you still get 7mgt cam shafts? if so at what price?

by **Fortyone.co.nz** » Thu May 24, 2007 1:46 pm

by **Fortyone.co.nz** » Thu May 24, 2007 1:56 pm

Nope not from HKS anymore!

by **Distrb** » Thu May 24, 2007 7:45 pm

Prince on:

4x600cc Sard Injectors Top feed, High impedance.

please?

by **Fortyone.co.nz** » Thu May 24, 2007 8:41 pm

660cc only. Let me know the engine! circa $745

by **Fortyone.co.nz** » Thu Jun 07, 2007 6:47 pm

Still current. Prices are good!

by **LEV_101** » Thu Jun 07, 2007 7:22 pm

price on Air Diversion Panels

http://www.greddy.com/products/display/ ... ategory=33

for altezza

thx

by **big_boy** » Thu Jun 07, 2007 7:49 pm

a price on HKS or any other brand thermastic oil cooler adapter for 7M-GE the one to keep the oil filter in the same place

by **Boosted_162** » Thu Jun 07, 2007 8:04 pm

Shoulda seen this before i ordered my other stuff! Im wanting front and rear cusco strut braces for 92 ST185H. Do they still make them?

by **Fortyone.co.nz** » Thu Jun 07, 2007 8:18 pm

LEV_101 wrote:price on Air Diversion Panels

http://www.greddy.com/products/display/ ... ategory=33

for altezza

thx

$135 for aluminum.

big_boy wrote:a price on HKS or any other brand thermastic oil cooler adapter for 7M-GE the one to keep the oil filter in the same place

Do you have a part number or example? Did you mean an oil filter relocation kit?

Boosted_162 wrote:Shoulda seen this before i ordered my other stuff! Im wanting front and rear cusco strut braces for 92 ST185H. Do they still make them?

C-One is an option also! $215 each from Cusco!

by **Boosted_162** » Thu Jun 07, 2007 8:53 pm

For that price ill take a front and rear one! Do you still have my all my details?

by **Fortyone.co.nz** » Thu Jun 07, 2007 9:22 pm

Boosted_162 wrote:For that price ill take a front and rear one! Do you still have my all my details?

Best if you confirm them all again =]

by **LEV_101** » Fri Jun 08, 2007 1:42 pm

Fortyone.co.nz wrote:
LEV_101 wrote:price on Air Diversion Panels

http://www.greddy.com/products/display/ ... ategory=33

for altezza

thx

$135 for aluminum.

can you get a red one and how long will i need to wait.

thx

by **barryogen** » Fri Jun 08, 2007 2:57 pm

Fortyone.co.nz wrote:
86_rolla wrote:Greddy E-manage blue price pls

E-Manage Blue - $555. (need to confirm, one mo!)
E-Manage Ultimate - $905. Please confirm engine / chassis!

Am semi-keen on an Ultimate, but I've heard that most of the new car ECU's seem to ignore the piggyback/interceptor engine management after sometime, can't figure out how they'd do that, but thats what I read online.

anyway, my car is a zze123 Corolla with a 2zzge in it... it's pretty much the same as the zzt231 Celica engine and drive train wise, but Greddy list the celica with a 2ZZ-FE, which never existed.

by **Fortyone.co.nz** » Fri Jun 08, 2007 3:03 pm

barryogen wrote:
Fortyone.co.nz wrote:
86_rolla wrote:Greddy E-manage blue price pls

E-Manage Blue - $555. (need to confirm, one mo!)
E-Manage Ultimate - $905. Please confirm engine / chassis!

Am semi-keen on an Ultimate, but I've heard that most of the new car ECU's seem to ignore the piggyback/interceptor engine management after sometime, can't figure out how they'd do that, but thats what I read online.

anyway, my car is a zze123 Corolla with a 2zzge in it... it's pretty much the same as the zzt231 Celica engine and drive train wise, but Greddy list it with a 2ZZ-FE, which never existed.

Yeah Greddy lists that particular one as being for the Celica ZZT231.

This make sense? http://www.toysport.com/Technical%20Inf ... _notes.htm

Wanna risk it?

by **barryogen** » Fri Jun 08, 2007 4:31 pm

indeed that is my engine, but I don't get why you told me that... don't really want to risk a $905 purchase on something that may not work anyway... the Apexi power FC has been modified to fit the Aussie version of the 2zz corolla, so it's probably a better option.

by **Fortyone.co.nz** » Fri Jun 08, 2007 4:35 pm

barryogen wrote:indeed that is my engine, but I don't get why you told me that... don't really want to risk a $905 purchase on something that may not work anyway... the Apexi power FC has been modified to fit the Aussie version of the 2zz corolla, so it's probably a better option.

Only because you would know more than us about this particular predicimant - and therefore you'd know if it was "doable" or not (I assumed - which is why I asked). Power FC and commander - $1420

http://www.apexera.co.jp/carlife/pro_ap ... c_list.pdf

2ZZGE is listed.

by **deaf_rattle** » Fri Jun 08, 2007 7:41 pm

cusco front strut brace arrived today

thanks Mac

by **Silent Knight** » Sun Jun 10, 2007 7:31 pm

Do you have any supplier that sells Valve Stem Seals and Valve Springs for a 1JZ-GTE?

by **Fortyone.co.nz** » Mon Jun 11, 2007 5:14 pm

Silent Knight wrote:Do you have any supplier that sells Valve Stem Seals and Valve Springs for a 1JZ-GTE?

Hmm nope sorry! HKS, JUN and Greddy are all no-no's!

Toyspeed.org.nz Message Board

Groupbuy 2 - Cusco! SARD, JUN, HKS, Apexi, Trust

Who is online