
Thanks anyway Mr Revhead

Well, i wanting to know cos I got a trottle body off a silvertop and just wanted to check if it is the facelift item as i suspect it to be.
I measured it and it is 47mm and i hear the silvertop are only 45mm? but the butterfly itself is 45mm I think.. not 100% sure cos can't really measure it. At the top of the qaud trottle, it got 2 lever thing so I guess it must be silvertop since i heard that the blacktop item only have 1 lever at the top.
I brought a custom made manifold for 16v engine and they are to fit the silvertop quad trottle and i noticed a very minor problem are the hole on the custom manifold are exact size(45mm) as the quad trottle and also with human error, when fitted on, it line up 98% well only suppost to 100%... so, I just need to do abit of porting myself on the custom manifold to make them line up well, and make the air flow smoothly

the stuff they sell at $2 shop are pretty good.. the grinding stone works well!.. better than a file which will take me forever to do them all

just brought another pack today as the 1st pack only did 3 1/2 holes before all the stone worn out
