What's this?

[Pelo]

1) Is this a redtop, small port, non-tvis 4A-GE? It's in an AW11. (Big image!)
http://www.rebelweb.co.nz/pelosplace/pi ... engine.jpg
2) How much are these extractors worth? They are press bent I think.
http://www.rebelweb.co.nz/pelosplace/pi ... actors.jpg
Cheers and thanks for the peanuts!

[kingcorolla]

the 1st image is not a redtop. It is either a blue or a red/black top. i say that judging by the HT lead arrangement. they go underneath the centre bit on redtops. Its also a map sensored version. The cam covers have been painted.

[matt dunn]

Yes. Definatly not a redtop. Red top's dont have the air temp sensor in the manifold, and the manifolds that do have that wont fit onto the redtop heads. Dist and leads are a good sign too but they may not be the correct ones for that engine if it's a transplant.

Extractors s/h are worth as much as you want to pay.
If I was buying I think i'd pay about $80??

matt

[vvega]

id be with a bluetop
8 runners and everythings in theh right place for it in a aw11

[Caveman]

It looks like a bluetop tvis (8 intake ports). It looks like someones gone to the trouble of painting the rocker cover.

[MetalupYoAss]

and grinding off the 1600 infront of TOYOTA on the exhaust cam cover

[Pelo]

Sweet thanks guys. I own the car and the manifold just wanted to identify the bits