Toyspeed.org.nz Message Board

by **NZ_AE86** » Sat Jul 23, 2005 10:22 pm

Kiki wrote:well i myt just go and take out my cad now then... wot about DIY pannel beating?....

As long as it is not all bog! :wink:

I assume you mean stuff you have done?? Should be ok, I would have to see it first

by **Victoria** » Sun Jul 24, 2005 11:15 pm

my car had 500$ worth of damage done to it by a big polynesian boy gettin pushed into it, it only folded a little bit, its mostly just rolled in, so i was thinking id just take off that pannel and push it out somehow..
just checking that it doesnt have to b done by a registered person or n e thing..

by **crnkin** » Mon Jul 25, 2005 11:24 am

NZ_AE86 wrote:
Kiki wrote:well i myt just go and take out my cad now then... wot about DIY pannel beating?....

As long as it is not all bog! I assume you mean stuff you have done?? Should be ok, I would have to see it first

where do you work? B+A motors in newtown has been shut down

by **NZ_AE86** » Mon Jul 25, 2005 4:43 pm

crnkin wrote:
NZ_AE86 wrote:
Kiki wrote:well i myt just go and take out my cad now then... wot about DIY pannel beating?....

As long as it is not all bog! I assume you mean stuff you have done?? Should be ok, I would have to see it first

where do you work? B+A motors in newtown has been shut down

B + A motors? Who the fluck are they??

MY KE70'S · by **pervert** » Mon Jul 25, 2005 4:50 pm

Kiki wrote:my car had 500$ worth of damage done to it by a big polynesian boy gettin pushed into it, it only folded a little bit, its mostly just rolled in, so i was thinking id just take off that pannel and push it out somehow..
just checking that it doesnt have to b done by a registered person or n e thing..

If it is just a big round dent, and hasn't creased the panel as such, then usually a household plunger will pop it back out, seriously.

by **Victoria** » Mon Jul 25, 2005 4:55 pm

Hey thanks for that, ill give it a go, anythings worth a try to save 500$

by **crnkin** » Mon Jul 25, 2005 8:56 pm

b+a was the only wof place in wellington worth going to, would pass anything for a wof, as long is it has a windscreen hehe. So where you work?

by **Spannergal** » Mon Jul 25, 2005 10:44 pm

crnkin wrote:b+a was the only wof place in wellington worth going to, would pass anything for a wof, as long is it has a windscreen hehe. So where you work?

i believe that NZ_AE86 works at L Alexander. Behind/next to Rutherford and Bond Toyota on Hania Street.

by **NZ_AE86** » Mon Jul 25, 2005 10:54 pm

Looks like my cover is blown..... :lol:

by **TygerTung** » Tue Jul 26, 2005 6:20 pm

Haha when I got my last wof, the dude noticed I had a 5K insted of a 4K, just wrote in the comment 5K engine fitted! passed me no worries though!

by **Victoria** » Tue Jul 26, 2005 11:21 pm

from the sounds of things, WOF these days dont mean much, mayb they should just pass n e thing that still moves... with out beaing pushed.

by **Spannergal** » Wed Jul 27, 2005 6:47 pm

Kiki wrote:from the sounds of things, WOF these days dont mean much, mayb they should just pass n e thing that still moves... with out beaing pushed.

nah, still applies in a lot of circumstances - just coz you have a WOF wouldn't get you out of things that would get you ticketed such as a brake light out.

From what I've been told by those who assess them, its a visual inspection of the road worthiness of a vehicle.
Put basically, a visual check of how safe it is for the car to be on the road.

Toyspeed.org.nz Message Board

new laws to pass WOF

Who is online