T4-T60-1 turbo info needed!

[Damio]

Does any1 know anything bout the T4-T60-1, need to know hw much boost it good for and how quick it spools.

[nite b]

Version/trim of T60-1? Plain or Ball Bearing? A/R's? Brand?

Then engine may possibly play a small factor, pretty laggy on a 2K, poss good on a 2JZ though....

[Phothog]

As nite b has said.. it all depense on the engine....
a 60-1 will flow more boost than a standard engine will handle..
spooling... well if you have a well sorted 1 - 2jz ( as one of my customers has) it could spool before 3000rpm... but if you had a 4efte with nothing done to it it could spool at 9000rpm....

and it also matters what is on the turbine side... standard TB03, stage ? shaft, O or P trim .48 to a 1.32 A/r turbine housing...

a 60-1 is just a name for the compressor wheel and nothing else...

(the above mention 1.5jz was producing about 430kw @ 6500 Rpm
spooling @ about 3500rpm on 24psi of boost, it use to spool before 3000rpm with a smaller turbine housing.)