while doing my gearbox and clutch mission i noticed that the steel plate that goes between my enigne and gearbox is not the same flange pattern so two bolts under the starter motor dont line up, can i just reslot or drill the holes where needed or how vital are these plates to have ?
cheers
purpose of steel plate between 4age - T50 ?
Moderator: The Mod Squad
7 posts
• Page 1 of 1
purpose of steel plate between 4age - T50 ?
by AE85.6 » Tue Dec 27, 2005 9:18 pm
Last edited by AE85.6 on Thu Dec 29, 2005 1:46 pm, edited 1 time in total.
If you drink, and drift,
your a bloody lunatic
your a bloody lunatic
-
AE85.6 - Toyspeed Member
- Posts: 1563
- Joined: Thu Jan 29, 2004 5:18 pm
- Location: Auckland
by fangsport » Tue Dec 27, 2005 9:59 pm
the plate stops cerap from entering the bellhousing and clutch mechanism, it also ensures the block stays are lined up with the bellhousing. sounds like you have the wrong sandwich plate for the bellhousing/starter combination. redrill the holes for starter.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin
f#@k you i won't do what ya tell me
http://www.facebook.com/pages/Fangwood/225658970893404
f#@k you i won't do what ya tell me
http://www.facebook.com/pages/Fangwood/225658970893404
- fangsport
- Toyspeed Member
- Posts: 4169
- Joined: Sun Nov 30, 2003 10:52 am
- Location: Timaru
by KinLoud » Wed Dec 28, 2005 8:13 am
The metal sandwich plate...
- locates the starter using the big round hole and the holes that the dowels fit through, the 2 bolt holes aren't critical.
- keeps crap from getting into the clutch
I would be curious to know why it isn't the right one in the first place?
Ken
Ham
021 408 863
- locates the starter using the big round hole and the holes that the dowels fit through, the 2 bolt holes aren't critical.
- keeps crap from getting into the clutch
I would be curious to know why it isn't the right one in the first place?
Ken
Ham
021 408 863
I used to think that the orange and green tictacs gave you special powers. The orange ones would make you stronger and the green ones would make you faster. So i used to eat some green ones and run around my lounge as fast as i could, then eat the orange ones and try to pick up the sofa. I wish it were true!
-
KinLoud - ** Moderator **
- Posts: 2893
- Joined: Thu May 16, 2002 7:39 pm
- Location: Auckland
by fangsport » Wed Dec 28, 2005 9:25 am
KinLoud wrote:
I would be curious to know why it isn't the right one in the first place?
there are 2 different starters that are used with the T-50. there is the soliniod type and reductiion gear type
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin
f#@k you i won't do what ya tell me
http://www.facebook.com/pages/Fangwood/225658970893404
f#@k you i won't do what ya tell me
http://www.facebook.com/pages/Fangwood/225658970893404
- fangsport
- Toyspeed Member
- Posts: 4169
- Joined: Sun Nov 30, 2003 10:52 am
- Location: Timaru
by AE85.6 » Thu Dec 29, 2005 8:28 am
KinLoud:
ye im curious too, but parts could have been scarce at the time my 85.6 had all its crap swapped over or someone thought it fits so thats good enough, i dunno the engine and gearbox was done when i bought it so there is still alot of things i find out along the way.
ye im curious too, but parts could have been scarce at the time my 85.6 had all its crap swapped over or someone thought it fits so thats good enough, i dunno the engine and gearbox was done when i bought it so there is still alot of things i find out along the way.
If you drink, and drift,
your a bloody lunatic
your a bloody lunatic
-
AE85.6 - Toyspeed Member
- Posts: 1563
- Joined: Thu Jan 29, 2004 5:18 pm
- Location: Auckland
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 5 guests