cam timing marks aw11 4agze-now with idle probs

[Psycho_Dad]

ok im attempting to install a cambelt on a 4agze on my aw11...

i can see the mark on the crank where tdc lines up easy, but where to i find the marks for the camshafts? im guessing somewhere on the camgears their is a nic or white paint and on the inner timing cover their is a mark their im suppposed to follow? i really wanna get this car on the road i have had it for 2 months and still not drivable grrrrr

any help terribly apreciated, id allmost pay for pics
Peace
Psycho_Dad

[slighty_sykotic]

The marks are two "dot" like thing. Basically a impression.

On the cam gears, should be real easy to see (one cam may have two dots..)

--Sykotic

[85AW20v]

And also looking in through the oil filler hole, you should see an indent on the inlet cam when its lined up right.

[slighty_sykotic]

I had trouble seeing that indent in the oil filler cap... Like, I couldnt find it.

My car runs fine though just using the other two marks.

--Sykotic

[Psycho_Dad]

yeah found the groove, hiden under a dot of white paint that i couldnt see under workshop light.. , now car starts and doesnt idle, well does when cold, but stalls when warm, i havnt done the timing but took it for a drive and it seems like the supercharger isnt working at all... again would that be timing? damn cars starting to stress me out... 2 months driven only a handfull of times

Peace
Psycho_Dad

[StuartM]

to set the timing, wire a paperclip between T and E1 terminals inside the diagnosis connector, otherwise the ECU will be going spark advance control.