Toyspeed.org.nz Message Board

by **AE91Sprinter** » Fri Jun 09, 2006 3:04 pm

5afe, temperature sensor testing.

Anyone know how to do this? ive looked around the net and the obvious searches arent finding anything...

cheers

by **AE91Sprinter** » Fri Jun 09, 2006 4:43 pm

took the sensor out.

Cold reading was around 3900 ohms
Warm (ie water at 60 odd degrees) was at 800 ohms.

still cant find what its meant to be though...

by **2LTR Rona** » Fri Jun 09, 2006 5:12 pm

dont kow if this will help or not......

http://aarc.epnet.com/application/9114/ ... e_Sens.htm

Not for your exact one but may give an insight

by **Steve123** » Fri Jun 09, 2006 8:50 pm

The results sound about right, they usually go open loop when faulty. Whats the problem with the car?

by **AE91Sprinter** » Sat Jun 10, 2006 6:53 pm

extremely hard to start

have been checking things for a while now, nearly at wits end... i dont have the cash to throw at spare parts that arent going ot fix it, thats the major issue.

by **CozmoNz** » Sat Jun 10, 2006 6:57 pm

tryed cold star injector?

by **AE91Sprinter** » Sat Jun 10, 2006 7:51 pm

i believe it doesnt have one

by **CozmoNz** » Sat Jun 10, 2006 8:09 pm

All Vac hoses connected? ex gf's 5efhe had 1 that caused an odd occurance every now and then, just because it "fell out"

by **AE91Sprinter** » Mon Jun 12, 2006 3:22 pm

yep, thats definitely fine.

However, have just found the headgasket appears to have gone... however the starting problem was prevailent before the headgasket looked problematic.

Toyspeed.org.nz Message Board

temperature sensor testing AFE series engine

temperature sensor testing AFE series engine

Who is online