ta22 brake conversion, name it. 56k warning

[hsmidy]

hey so im doing an engine conversion on my celica at the moment and ive been looking into up grading my brakes.

but i would kinda like to know what the brake set up i have at the moment is, its not orginal.

the disc measures about 22m thick and off the top of my head it was about 220-230 in diameter.

its got a single piston sliding caliper setup. ive included some pictures to improve my chances of getting an answer.

http://img149.imageshack.us/img149/9614/imgp0846ux5.jpg

http://img149.imageshack.us/img149/3272/imgp0847lc5.jpg

http://img149.imageshack.us/img149/8964/imgp0873gd8.jpg

http://img205.imageshack.us/img205/2697/imgp0874po7.jpg

http://img205.imageshack.us/img205/1803/imgp0876ef6.jpg

http://img205.imageshack.us/img205/1914/imgp0875om0.jpg

[Prymal]

it could be a corona strut/corona disc swap , it could be ra23 front , but its definantly not sumitomo 2 pot or 4 pot hilux basis ..

[hsmidy]

yeah i know its notthing too flash but was just wanting some confirmation,

and there any measurements or anything that i could do too help distiguish(sp) which swap it would be?

[starlett]

try comapring with this table http://www.toycrazy.net/index1.html

its from mark bucklands site toycrazy.net

[hsmidy]

hey thanks for that link starlett, looks like ive got an ae86 disc on there.

[starlett]

no worries. 86 was my guess aswell... caliper is 86 also?

[hsmidy]

not sure anything that would set it appart from the rest, i can only assume it is(i take it the 86's came with a single pot caliper?)