4AGTE turbo water lines and heater lines confirmation

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

4AGTE turbo water lines and heater lines confirmation

Postby ae93_sx » Fri May 02, 2008 6:30 pm

Image

I'm in the process of getting my 4agte ready. My current problem is where the water lines go, i think i have it corrent but need a little confirmation. The yellow, green and red lines are meant to be the factory lines. The blue lines are where i plan on tapping in to for the turbo's water lines.

can anyone confirm if this is right or even if it matters.

Also, do the 2 spots where i intend on taking water for the turbo from look suitable?
4agte ae92 hatch
User avatar
ae93_sx
Toyspeed Member
 
Posts: 45
Joined: Sat Sep 23, 2006 7:54 pm
Location: Tasmania, Australia

Postby Bazda » Fri May 02, 2008 6:49 pm

you dont need to run teh water lines,
its a hastle and a pain in the arse, 90% of us on here dont use them.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby method » Fri May 02, 2008 6:52 pm

if its a ht18, mine has been fine with no water.

I've had the exhaust housing glowing red too. Hasn't seized up yet :lol:
PICS UPDATED DAILY
Evo IV - 13.0 @ 167.8 kph Full street trim - SOLD
Boosted 4age Ke30 - Im back and better than ever!
User avatar
method
Toyspeed Member
 
Posts: 1466
Joined: Thu Jul 01, 2004 5:58 pm
Location: West Auckland

Postby escortman » Fri May 02, 2008 8:03 pm

just tee into the water lines to throttle body whre i did mine
toyota supra 1996 2jzgte t64 turbonetics
Was 300hp on 10psi with stock twins, hopefully on similar boost be around 400hp

4x4 toyota blizzard offroader

widebody markII escort panelvan

RIP 13sec AE82 fxgt 4agte 5psi TD05 20g
escortman
Toyspeed Member
 
Posts: 1651
Joined: Thu Sep 29, 2005 4:14 pm
Location: West Auckland

Postby ae93_sx » Sat May 03, 2008 12:00 am

i hadn't considered not running them :D anyhow i have piping ready to go so i'll run them. I might just run them from where the throttle body lines used to come from. i nolonger use the TB water lines anyhow
4agte ae92 hatch
User avatar
ae93_sx
Toyspeed Member
 
Posts: 45
Joined: Sat Sep 23, 2006 7:54 pm
Location: Tasmania, Australia

Postby tsoob » Sat May 03, 2008 10:45 am

yeah mate de bullshit them
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby escortman » Sat May 03, 2008 12:15 pm

just run em if u have the lines
toyota supra 1996 2jzgte t64 turbonetics
Was 300hp on 10psi with stock twins, hopefully on similar boost be around 400hp

4x4 toyota blizzard offroader

widebody markII escort panelvan

RIP 13sec AE82 fxgt 4agte 5psi TD05 20g
escortman
Toyspeed Member
 
Posts: 1651
Joined: Thu Sep 29, 2005 4:14 pm
Location: West Auckland

Postby Bazda » Sat May 03, 2008 12:29 pm

I wouldnt bother.

1. More things to leak
2. More things to go wrong.
3. When pulling it apart more things to take off
4. When taking apart more mess!!!
5. Dont even need it.

Keep it simlpe and clean.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland


Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 10 guests