Toyspeed.org.nz Message Board

by **Maggs** » Wed Sep 17, 2008 1:48 pm

I just bought and installed a dizzy from a st190 for a corona st191 as the wrecker said it would work. Car started for half a second ,now wont start at all. starter now turns over very fast and high pitched. Rotor moves. Obviously the dizzy or could something else be wrong ?

by **strx7** » Wed Sep 17, 2008 3:09 pm

an ST190 has a 4SFE a ST191 has a 3SFE, larger engine, hence different numbers. However, there is 4 different dizzy's in those vehicles that we have struck, 2 different external coil type dizzys and 2 different internal coil dizzys, the difference is in the number of wires in the plug. If the number of wires in the plug it does the same job.

by **Maggs** » Wed Sep 17, 2008 4:37 pm

So you cant get a st190 3sfe ? Would you know if the distributors look identical ? Hope i havn't f*cked my engine

by **Rob** » Thu Sep 18, 2008 6:58 pm

Put the toyota part number up here boss and I'll have a look at work.
Where did you buy it?

Also what colour the sticker is which the part number is on.

by **Crimson Tears** » Thu Sep 18, 2008 7:13 pm

Have you checked to see that it hasn't jumped a tooth on the timing belt?

Toyspeed.org.nz Message Board

st190 - 191 dizzys compatible ?

st190 - 191 dizzys compatible ?

Who is online