car painting

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

car painting

Postby 0EBUNY » Fri Dec 19, 2008 11:35 pm

ok ive decided to spend some time and money on my old rolla wagon. i wanna get it repainted.

the paint on the front 3 panels is cracked really badly so may need to be taken back to bare metal?? i only want it painted a nice black ( i think) nothing too special.

what kinda price range should i expect for this kinda job?? and does anyone know any good/cheep painters they could recommend? im in hamilton but dont mind traveling a little for a good job/price.

thanks
0EBUNY
Toyspeed Member
 
Posts: 74
Joined: Sun Sep 22, 2002 11:06 pm
Location: Hamilton

Postby Quirky » Sat Dec 20, 2008 3:38 am

There have been a few posts on new paint.
Expect a price of around $3000-$3500 for a sand back and new basic colour.
$3-500 more for metallic, and $2500-3500 for pearlesent and candy colours

Those were the rough estimates I got 2 years ago around Wellington.
Don't think prices have changed too much.
Hello There
Quirky
Toyspeed Member
 
Posts: 482
Joined: Tue Sep 19, 2006 5:48 pm
Location: Townsville, Australia

Postby Dell'Orto » Sat Dec 20, 2008 11:44 am

If the paint has crazy cracked then it will need to go back to bare metal. That gets spendy as obviously it takes longer to do ;)
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby tsoob » Sat Dec 20, 2008 12:07 pm

bro the words cheap and good painter are not to be used in the same sentance
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby Dell'Orto » Sat Dec 20, 2008 12:42 pm

Well, it depends what you call cheap...the panel and paint on my sedan totalled $3500, and I think that was pretty cheap, especially given the finish. Of course dont expect a show kinda finish for $2k, it'll never happen (Unless you're sleeping with the panelbeater and painter :lol:)
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Cakky » Sat Dec 20, 2008 1:14 pm

also black requires extra attention as everything needs to be really smooth as black will show up any imperfections really easily
1989 Corolla GT sedan blacktop 20v
Cakky
Toyspeed Member
 
Posts: 747
Joined: Sat Dec 03, 2005 4:18 pm
Location: Wellington

Postby Quirky » Sat Dec 20, 2008 10:43 pm

When I had my old FXGT, I got that painted Silver for $3000 at a shop in Miramar which i think now has relocated to Kilbirnie somewhere.
The paint looked good, but near the bottom, roughly from the chassis to about 8 inches up, it had the orange peel effect, sorta lumpy.
You didn't really notice unless you were on your knees looking really close.
I only found out when I washed the car for the first time.
Definitely ask around, make sure to check out there previous work.
Hello There
Quirky
Toyspeed Member
 
Posts: 482
Joined: Tue Sep 19, 2006 5:48 pm
Location: Townsville, Australia


Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 11 guests