Toyspeed.org.nz Message Board

by **loudstealthGT-Four** » Tue Jul 20, 2010 11:42 pm

Can a fuel rail and injectors from a Gen3 3SGTE be bolted onto a Beams 3SGE and work without modifying anything.

Cheers

by **Anth_555** » Wed Jul 21, 2010 8:23 am

no 3sgte injectors are side feed and 3sge injectors are top feed

by **Boosted_162** » Wed Jul 21, 2010 1:32 pm

Anth_555 wrote:no 3sgte injectors are side feed and 3sge injectors are top feed

Gen 2 and 3 are side feed, Gen 1 and 4 are top feed.

by **Malcolm** » Wed Jul 21, 2010 1:57 pm

but if you're swapping the whole rail and injectors then the top/side feed part becomes a bit irrelevant, it's more a question of whether the details in the head are the right spacing, match the injector seals (or if something which will fit can be swapped) and if the bosses for bolting the rail to the head are the same.

by **loudstealthGT-Four** » Wed Jul 21, 2010 6:47 pm

Malcolm wrote:but if you're swapping the whole rail and injectors then the top/side feed part becomes a bit irrelevant, it's more a question of whether the details in the head are the right spacing, match the injector seals (or if something which will fit can be swapped) and if the bosses for bolting the rail to the head are the same.

yip thats what im wanting to know, already knew about the top/side feed difference

by **nz_climber** » Wed Jul 21, 2010 7:47 pm

Another difference is the beams 3sge engines (on the altezza anyway) run a blind fuel rail, so would need to change pumps and add a return fuel line too. Not sure about the head spacings sorry

by **RomanV** » Thu Jul 22, 2010 1:44 pm

What's the point in swapping the rail anyway?

Can just swap injectors for other top feed ones.

by **loudstealthGT-Four** » Thu Jul 22, 2010 7:23 pm

RomanV wrote:What's the point in swapping the rail anyway?

Can just swap injectors for other top feed ones.

had a guy ask on trade me (who turboed his altezza) if they would fit as he wants to upgrade the factory altezza injectors

by **sergei** » Thu Jul 22, 2010 7:54 pm

loudstealthGT-Four wrote:
RomanV wrote:What's the point in swapping the rail anyway?

Can just swap injectors for other top feed ones.

had a guy ask on trade me (who turboed his altezza) if they would fit as he wants to upgrade the factory altezza injectors

He could use GTT injectors, they will be straight fit.

Toyspeed.org.nz Message Board

3SGTE Fuel Rail on Beams 3SGE

3SGTE Fuel Rail on Beams 3SGE

Who is online