Smallport 4AGTE

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Smallport 4AGTE

Postby iOnic » Sun Jun 05, 2011 7:47 pm

Ello :) Not very clued up on 4AGE's so asking the experts for some advice. I picked up a turbo setup very cheaply so thinking of slapping together a basic 4AGTE. Just wondering what bits people go for in terms of Fuel Pumps, Injectors, Spark Plugs etc What can the stock pistons + CR handle? Also details on oil lines?

The turbo is a little TD04 which will suit my needs perfectly I think. Gonna use a W2A intercooler of some description as I'd like to keep the car the same externally :lol: Only really want a basic (~150kw) package. Any advice you have will be greatly appreciated :)

EDIT: Got lots of parts off a 3SGTE MR2 so if any of that is of any use it would be nice to use it (Fuel pump/Injectors especially)
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby themaleman » Sun Jun 05, 2011 8:40 pm

im using standard 4agze everything including ecu, runs sweet
the faster u go, the quicker u get there

manual 80 series cruiser
4agte ae92 Levin
a15 powered sj410
User avatar
themaleman
Toyspeed Member
 
Posts: 971
Joined: Sat Dec 11, 2004 10:16 am
Location: west auckland

Postby QikStarlie » Sun Jun 05, 2011 10:32 pm

compression will be fine. 98 and good tune. oil lines just the usual, weld return to sump and come off oil press sender for feed. plugs chuck some 7's in it
User avatar
QikStarlie
Toyspeed Member
 
Posts: 1110
Joined: Tue Mar 25, 2003 10:30 pm
Location: lost..

Postby iOnic » Sun Jun 05, 2011 11:27 pm

Sweet cheers Kris :)
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby tsoob » Tue Jun 07, 2011 11:43 am

QikStarlie wrote:compression will be fine. 98 and good tune. oil lines just the usual, weld return to sump and come off oil press sender for feed. plugs chuck some 7's in it


based on what ecu...
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby Truenotch » Tue Jun 07, 2011 12:55 pm

CXGPWR ran a hi comp small port (shaved head, TRD .8 gasket) with a turbo on it and it ran fine until we realised that the piston had been hitting the head from excessive head shaving.

It was 180kw on a conservative road tune using Link G4 storm ECU and about 10psi. Then he slapped redtop bigport pistons in it and it was fine - shortly followed by some form of catastrophic failure.
User avatar
Truenotch
Toyspeed Member
 
Posts: 1960
Joined: Sun Jan 09, 2005 3:41 pm
Location: Hamilton

Postby QikStarlie » Tue Jun 07, 2011 6:32 pm

tsoob wrote:
QikStarlie wrote:compression will be fine. 98 and good tune. oil lines just the usual, weld return to sump and come off oil press sender for feed. plugs chuck some 7's in it


based on what ecu...


hes running a v3 link from memory?

just did an engine swap around on my trueno. was running bigport block +smallport head. so 9.4:1. on 12psi. now have the same smallport head, but with different block, running toda 11.5:1 pistons. same boost. the 11.5 engine absolutely kills the old one, response and power wise. in saying that will require better fuel to get more boost/power out of it. long as you don't run into detonation will be fine

pic of said engine in blog below

ps: tsoob, any news on those tyres yet!?
User avatar
QikStarlie
Toyspeed Member
 
Posts: 1110
Joined: Tue Mar 25, 2003 10:30 pm
Location: lost..

Postby iOnic » Tue Jun 07, 2011 6:58 pm

Yeah sorry should have mentioned the car's already got a Link in it and will be tuned by myself.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby tsoob » Thu Jun 09, 2011 11:44 pm

I had the toyo rep in yesterday and they are having problems due to the tsunami.. send me an email and ill follow up again :)
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 26 guests