Silvertop boost handling ability

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Silvertop boost handling ability

Postby dnalunchie » Tue Nov 13, 2012 1:50 pm

Out of curiosity how much boost do you guys reckon a stock silvertop could support assuming the proper fueling and a well tuned aftermarket ECU.

I was thinking like 6-10psi?

Also do you think a GT28 turbo would be too big for it or just right if the aim is good low down spool.

IF not the gt28 then which turbo would you recommend and why?

Just doing a bit of research for future projects very very far down the field.

P.S I know the topic has been discussed before but from what I found not the info on boost level specifics and turbo choice.
Last edited by dnalunchie on Tue Nov 13, 2012 2:21 pm, edited 1 time in total.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby Shrike » Tue Nov 13, 2012 2:02 pm

The silvia turbos or the td04 would be good sized for response etc

and assuming there is no knock it should be all good
Why dream it when you can live it
User avatar
Shrike
Toyspeed Member
 
Posts: 731
Joined: Fri Jul 01, 2011 3:05 pm
Location: Melbourne

Postby dnalunchie » Tue Nov 13, 2012 2:21 pm

Shrike wrote:The silvia turbos or the td04 would be good sized for response etc

and assuming there is no knock it should be all good


Silvia uses GT28 I believe.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby Shrike » Tue Nov 13, 2012 2:28 pm

Depends which silvia

The earlier ones uses a T25

Depends what power you want

The s15 uses a T28 off the top of my head and is good for about 180kw I did lots of research into it ages ago ill see if I can dig it out when I get home
Why dream it when you can live it
User avatar
Shrike
Toyspeed Member
 
Posts: 731
Joined: Fri Jul 01, 2011 3:05 pm
Location: Melbourne

Postby dnalunchie » Tue Nov 13, 2012 3:30 pm

Shrike wrote:Depends which silvia

The earlier ones uses a T25

Depends what power you want

The s15 uses a T28 off the top of my head and is good for about 180kw I did lots of research into it ages ago ill see if I can dig it out when I get home


thanks
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby Dell'Orto » Tue Nov 13, 2012 4:49 pm

There was a project on here a few years ago, I think he ran 6psi on a TD04, and made 130 odd kw. Stock internals, can't remember what fuelling he had. Ran a V5 Link I think.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby jacobrjett » Tue Nov 13, 2012 5:09 pm

did you buy a 101?
User avatar
jacobrjett
Toyspeed Member
 
Posts: 1212
Joined: Sun Mar 25, 2012 12:03 am
Location: Wellington

Postby CAMB01 » Tue Nov 13, 2012 5:24 pm

1993 Mitsubishi EVO 1 Racecar
1998 Mitsubishi Mirage ZR Asti Mivec (Daily Whip)
1989 AE91 FX-ZS (Previous)
1994 AE101 Levin 20v (previous)
1992 EE90 Corolla Sedan (previous)
1986 AE82 FX-GT Corolla (previous)
1989 AE92 FX-GTZ Supercharged (previous)
1992 EE90 Corolla Hatchback (previous)

Custom Works Automotive
http://www.HCCC.org.nz
User avatar
CAMB01
Toyspeed Member
 
Posts: 1440
Joined: Fri Jan 17, 2003 11:33 pm
Location: Wellyz

Postby Dell'Orto » Tue Nov 13, 2012 6:28 pm

Thats the bugger....seems my memory is slipping in my old age :lol: Was a really nice looking car in the flesh too
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby RS13 » Tue Nov 13, 2012 6:47 pm

Early SR20DETs ran a T25G, the later ones ran the T28s. I'm sure either would be well suited to a 4AGE.

Although, you're going to spend thousands setting up a proper fuel system and well-tuned aftermarket ECU but then run an internally stock 20ish year old engine, probably with 200+kms on it? You'd at least want to rebuild it.. but then, you'd be silly not to throw in at least GZE pistons along the way.. what are you planning to do with it?
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Postby Mr Revhead » Tue Nov 13, 2012 8:28 pm

This is why I told you to buy a Corona or Corolla Wagon :P
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby iOnic » Tue Nov 13, 2012 9:21 pm

Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby dnalunchie » Wed Nov 14, 2012 1:44 am

RS13 wrote:Early SR20DETs ran a T25G, the later ones ran the T28s. I'm sure either would be well suited to a 4AGE.

Although, you're going to spend thousands setting up a proper fuel system and well-tuned aftermarket ECU but then run an internally stock 20ish year old engine, probably with 200+kms on it? You'd at least want to rebuild it.. but then, you'd be silly not to throw in at least GZE pistons along the way.. what are you planning to do with it?


Just a toy. This isnt going to happen in the next few months but I like knowing how things work ahead of time. Goals are good, they keep you motivated.

I know the STI will spank it but something inside me still loves the idea of a cheesy boyracer levin with a turbo whacked on. Just the kid in me I guess.
EX:89 RS and GT Legacys, 90 EF9 Civic, 95 Integra R, 95 AE101, 90 ST185, 88 Accord, 87 3rdoor and 5door Swift hatch, 91 Pontiac Lemans, 80 Liftback Celica, 95 Hornet 250
Current: 90 3sfe Corona
User avatar
dnalunchie
Toyspeed Member
 
Posts: 3393
Joined: Wed Nov 10, 2004 12:07 am
Location: Christchurch

Postby RS13 » Wed Nov 14, 2012 1:50 pm

dnalunchie wrote:I know the STI will spank it but something inside me still loves the idea of a cheesy boyracer levin with a turbo whacked on. Just the kid in me I guess.


Hah, I know what you mean. For all the factory turbo cars I've owned, I still entertain thoughts of throwing a turbo kit on a D or B series vtec EG Civic.. have wanted to for years.. lol. :)
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Re: Silvertop boost handling ability

Postby matt dunn » Wed Nov 14, 2012 10:00 pm

dnalunchie wrote:Out of curiosity how much boost do you guys reckon a stock silvertop could support assuming the proper fueling and a well tuned aftermarket ECU.

I was thinking like 6-10psi?




With the right fuel and tuning and assuming it is a decent engine to start with I'd say 10 to 14 psi.

Pretty sure Willie's MR2 ran a standard ST turbo before he had it as one on the engines in it.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby Lurkin » Wed Nov 14, 2012 11:49 pm

if the cars free, and you have access/ fabricate yourself.. sure why not.

I faced this situation with the ae101 I previously had.

Frankly, for the time/effort/money it was worth putting in forged pistons.

but then, for the time/effort/money of the above, there were cheaper options for a more powerful car, that would likely be more reliable in the long run.

low boost/ high comp... should be fun!
Past casualties
1986 4age liftback (sold)
1985 4age aw11 (well crunched)
1993 ae101 gt apex levin (sold)
Lurkin
Toyspeed Member
 
Posts: 708
Joined: Thu Oct 09, 2008 3:25 pm

Postby gt4dude » Thu Nov 15, 2012 8:19 am

you want itsuki's car lol or wataru's car
セリカGT-FOUR ST205 中期型 (Chuuki)
GT2860RS ・ JE 86.5φ PISTON ・ FX400 CLUTCH ・ APEX P-FC
200AWKW / 370NM
User avatar
gt4dude
Toyspeed Member
 
Posts: 723
Joined: Wed Apr 07, 2010 10:56 am
Location: Auckland

Postby Lith » Thu Nov 15, 2012 9:46 am

RS13 wrote:I still entertain thoughts of throwing a turbo kit on a D or B series vtec EG Civic.. have wanted to for years.. lol. :)


Yeah, for some reason me too even though FWD turbos annoy me a bit. The combination of VTEC + boost makes for a very fun power delivery.
2007 Mazdaspeed Axela
User avatar
Lith
Toyspeed Member
 
Posts: 3137
Joined: Mon Dec 02, 2002 5:22 pm
Location: Kapiti

Postby Flannelman » Sat Nov 17, 2012 10:33 am

What I would do.

New rings, berrings, oil pump. Use upgraded valve springs as stock ST ones collapse under long term boost useage. Custom intake manifold, turbo exhaust manifold.

Use E85 for fuel so uprgading the fuel system is a must and aftermarket ECU. When tuning, the E85 will take more timing both under boost and off it giving greater throttle responce and increased torque/power throughout the rev range.

Select turbo for peak boost between 4-7000rpm. While larger turbos will provide greater power, this would setup will be more user friendly.

I see no reason that 14psi cant be used with this setup safely for a long engine life.
Flannelman
formerly known as Affroman
 
Posts: 461
Joined: Mon Jul 19, 2004 9:43 pm
Location: Old Plymouth

Postby Rookie » Mon Nov 19, 2012 4:32 pm

I know someone who is running 16psi on a stock silvertop except for 2 head gaskets, I think he uses an early evo turbo. Oh it's in his race car so you know it beaten on.
Rookie
Toyspeed Member
 
Posts: 78
Joined: Fri Jul 02, 2010 2:09 pm
Location: Turangi


Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 29 guests