AE101 Bushes
Moderator: The Mod Squad
6 posts
• Page 1 of 1
AE101 Bushes
by Insighttech » Wed Nov 20, 2013 6:47 pm
So I bought a junk SC AE101 Trueno. Its failed a WOF on front sway bar D bushes and front lower control arm rear bushes. My Question is what is the cost of buying these. Any tips on removing/replacing. Should I buy genuine rubber ones or buy aftermarket nolathane. Thanks
- Insighttech
- Toyspeed Member
- Posts: 205
- Joined: Tue Aug 21, 2007 9:39 pm
- Location: Wellington
by headshotnz » Wed Nov 20, 2013 6:54 pm
If its susperstrut you wont have a choice. I am assuming this is the same car which I got a phone call about today at work!
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by Insighttech » Wed Nov 20, 2013 7:03 pm
The guy at REPCO said he could supply nolathane. I would just have to measure the sway bar to see if it was 24mm. Yes SS. Thanks
- Insighttech
- Toyspeed Member
- Posts: 205
- Joined: Tue Aug 21, 2007 9:39 pm
- Location: Wellington
by AE82 FXGT » Wed Nov 20, 2013 9:25 pm
Sway bar bushes, yes you can get Nolathane.
Other bushes (ball joints?), if they are specific to SS, get genuine.
Other bushes (ball joints?), if they are specific to SS, get genuine.
Previous: '85 AE82 FXGT, '92 AE101 GTZ, '92 AE101 GT-APEX, '04 SE3P RX8, '05 Mazda 6 MPS, '97 NA8C MX5, '03 GSX250, '08 ZX6R, '13 GROM
Current: '07 GRE156 BLADE MASTER G
Current: '07 GRE156 BLADE MASTER G
-
AE82 FXGT - Toyspeed Member
- Posts: 1594
- Joined: Thu Nov 04, 2004 1:51 pm
- Location: Lower hutt
by Dell'Orto » Thu Nov 21, 2013 6:38 pm
Nolathane front swaybar mounts for AE101 chassis are incorrect, they list a plain D bush which won't fit the funny angled bracket they have. Super pro do a bush to suit though
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
by AE82 FXGT » Sat Nov 23, 2013 6:46 pm
Dell'Orto wrote:Nolathane front swaybar mounts for AE101 chassis are incorrect, they list a plain D bush which won't fit the funny angled bracket they have. Super pro do a bush to suit though
TIL
I never had a problem with the sway bar bushes when I had mine, so never really paid attention to the bracket that holds them apparently.
Previous: '85 AE82 FXGT, '92 AE101 GTZ, '92 AE101 GT-APEX, '04 SE3P RX8, '05 Mazda 6 MPS, '97 NA8C MX5, '03 GSX250, '08 ZX6R, '13 GROM
Current: '07 GRE156 BLADE MASTER G
Current: '07 GRE156 BLADE MASTER G
-
AE82 FXGT - Toyspeed Member
- Posts: 1594
- Joined: Thu Nov 04, 2004 1:51 pm
- Location: Lower hutt
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 44 guests