Tein Suspension VS TRD suspension

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Tein Suspension VS TRD suspension

Postby BZR4AGE » Sat Jun 10, 2006 11:36 am

Hi guys. I am thinking about changing my TRD coilovers to Tein. The reasons are:
1: TRD too stiff for NZ road (the one I am using is actually for circuit)
2: its getting old, and i think is starting 'degrade'

anyway, my question is. How good is tein. I done a search, and revhead says they are as good. But I asked some of my mates, they said they don't last as long - after a while it looses the damper and start to become very bouncy.

Is it true that you get what you pay for? becoz the Teins are 1/3 cheaper than the TRD ones. Anyone here had tein long enough to tell me?
The one I am getting is Tein Super Street. Which is not as stiff, and good for road condition. But what is setting me back is, if they are not going to last as long, I might as well change to new TRD ones, because my current one did last quite a while, the only reason i am not reconditioning it is because the surface casing of the front strut is loosing the blue coating, and I fear it will rust sooner or later.

Also, anyone know if Tein are reconditionable???
BTW, is for an AE111 superstrut

Anyway. Cheers guys 8)
User avatar
BZR4AGE
Toyspeed Member
 
Posts: 542
Joined: Thu Apr 28, 2005 5:47 pm
Location: Auckland

Postby AceSniper » Sat Jun 10, 2006 11:44 am

get the trd ones recond? and adjust the valving to suit your street use?
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby ROBODISCO_20v » Sat Jun 10, 2006 11:46 am

I've got TEIN coilovers in my levin, they're also very hard so you wont gain any ride cumfort over the TRD's.
I've had the car for just over 3 years and the shock are still as good as when i got them, so they dont wear out quickly.
Yes TEIN are reconditionable in NZ. Autolign suspension does them.
User avatar
ROBODISCO_20v
Toyspeed Member
 
Posts: 599
Joined: Tue Jan 28, 2003 12:49 pm
Location: Manukau Toyota - Parts Dept

Postby BZR4AGE » Sat Jun 10, 2006 12:08 pm

Acesniper:
like i said before, the front strut are losing the blue coating, and i fear it will rust or significantly affect the performance in a later stage.

ROBODISCO: Cheers for that info. Yea, i suspect it will be about the same, but the reason i want fully adjustable is because i want to be able to do the heights and damper rate....and also i think the EDFC is a great gadget to have LOL.
If no one else will second these opinions, then I probably will go for Tein, as they are cheaper than TRD.

Cheers again guys
BTW, i finally decided to get a loan from bank, and do up my car all together once and for all...for those who don't remember, i have the TODA engine kit sitting around waiting to be fitted. but can't wait till end of year when i go back to work during uni holiday, so LOAN it is. I am excited at seeing how much I will gain from the kit. Will keep posting for progress. Work should start early july.
http://img307.imageshack.us/img307/7739/img00285xy.jpg
(mod edit: that pic is HUGE! post links rather than images!!)
User avatar
BZR4AGE
Toyspeed Member
 
Posts: 542
Joined: Thu Apr 28, 2005 5:47 pm
Location: Auckland

Postby AceSniper » Sat Jun 10, 2006 2:15 pm

its only a coating... clean prime an paint, or while getting re-con get the cases powdercoated really isnt a big deal :p
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby BZR4AGE » Sat Jun 10, 2006 2:29 pm

hey acesniper. thanks for that, I never thought about it...I will check with autolign on the condition of my current struts, if they are still in good nick, then better to just recon it. Cheers! :P
User avatar
BZR4AGE
Toyspeed Member
 
Posts: 542
Joined: Thu Apr 28, 2005 5:47 pm
Location: Auckland

Postby crnkin » Sat Jun 10, 2006 3:24 pm

wicked kit there, musta set you back ALOT
kenny - "yours: 0hp @ 0rpm :D"
deaf_homo "currrently yes"

PLEASE get moderators to fight your fights for you if you are a cock master
User avatar
crnkin
Toyspeed Member
 
Posts: 1552
Joined: Thu Jun 03, 2004 8:48 pm
Location: Auckland

Postby BigDon » Mon Jun 12, 2006 7:38 pm

Also if you get Teins you will need to get a cert. If you stick with TRD you will not need to get a cert. As TRD comes within the defintion of OE.
www.europeandirect.co.nz
1996 AE111 BZ-G: TRD equipped road legal Club Car (Manfeild 1.25s) (SOLD)
1995 AE111 BZ-G: Stereo and daily driver (SOLD)
2005 NZ New Evo 9 GT (specd to FQ360) daily driver
2012 NZ New Outlander VRX - V6 family wagon
User avatar
BigDon
Toyspeed Member
 
Posts: 348
Joined: Fri Nov 07, 2003 6:47 pm
Location: Wellington

Postby BZR4AGE » Mon Jun 12, 2006 8:54 pm

the cert is not an issue, as I currently have one already, and also once I done my engine, i will need a new cert anyway. so that really isn't a problem for me
User avatar
BZR4AGE
Toyspeed Member
 
Posts: 542
Joined: Thu Apr 28, 2005 5:47 pm
Location: Auckland

Postby Bazda » Mon Jun 12, 2006 10:01 pm

BigDon wrote:Also if you get Teins you will need to get a cert. If you stick with TRD you will not need to get a cert. As TRD comes within the defintion of OE.


you sure with that, my mate got TRD adjustables for his ae111 and had to get a cert.

I had teins in my last car, still have them lying. Very stiff for the road, my mate had the TRD ones on his ae111 they were even stiffer.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Santa'sBoostinSleigh » Mon Jun 12, 2006 10:57 pm

i want adjusties for my AE92 but bugger all (decent) companies seem to make them now :(
Santa's Mega Sale
Santa's TardMe Listings
GTFX: viewtopic.php?t=67655
Discussion: viewtopic.php?t=67658

Some cocksmack stole one of my 5ANTA plates, if you see it please let me/the police know, ta
User avatar
Santa'sBoostinSleigh
** Moderator **
 
Posts: 4154
Joined: Wed Jan 12, 2005 5:54 pm
Location: 'Naki Massif

Postby Bazda » Mon Jun 12, 2006 11:05 pm

Santa'sBoostinSleigh wrote:i want adjusties for my AE92 but bugger all (decent) companies seem to make them now :(


Dont you wish you owned my teins :D
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Santa'sBoostinSleigh » Mon Jun 12, 2006 11:08 pm

Bazda wrote:
Santa'sBoostinSleigh wrote:i want adjusties for my AE92 but bugger all (decent) companies seem to make them now :(

Dont you wish you owned my teins :D

they for sale?
if so email me details!! ;)
Santa's Mega Sale
Santa's TardMe Listings
GTFX: viewtopic.php?t=67655
Discussion: viewtopic.php?t=67658

Some cocksmack stole one of my 5ANTA plates, if you see it please let me/the police know, ta
User avatar
Santa'sBoostinSleigh
** Moderator **
 
Posts: 4154
Joined: Wed Jan 12, 2005 5:54 pm
Location: 'Naki Massif

Postby Bazda » Mon Jun 12, 2006 11:15 pm

Santa'sBoostinSleigh wrote:
Bazda wrote:
Santa'sBoostinSleigh wrote:i want adjusties for my AE92 but bugger all (decent) companies seem to make them now :(

Dont you wish you owned my teins :D

they for sale?
if so email me details!! ;)


Sorry not wanting to let go of them yet, wana try them out on the circuit first and try the ones I have in the car now and see if there gona be a difference.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Mr Revhead » Mon Jun 12, 2006 11:46 pm

TRD are not required to have a cert.

they are by the ltsas own definiton factory parts.
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby TRD Man » Tue Jun 13, 2006 4:55 pm

Whilst I'd like to agree with you on this sentiment Warwick, and I can certainly see why you should think that way, I don't believe that this can be taken for granted.
In fact I'd suggest that few testing stations, if any, would consider TRD suspension OE equipment.
User avatar
TRD Man
Toyspeed Member
 
Posts: 1414
Joined: Fri Feb 13, 2004 5:26 pm
Location: Lower Hutt

Postby Mr Revhead » Tue Jun 13, 2006 5:03 pm

then in that case they are mistaken

iv researched it :wink:
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby ROBODISCO_20v » Tue Jun 13, 2006 5:54 pm

You'll probably find that anything that's adjustable even if it's TRD will need to be certified.
User avatar
ROBODISCO_20v
Toyspeed Member
 
Posts: 599
Joined: Tue Jan 28, 2003 12:49 pm
Location: Manukau Toyota - Parts Dept

Postby Mr Revhead » Tue Jun 13, 2006 5:55 pm

read above......
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby IH8TEC » Tue Jun 13, 2006 6:06 pm

ROBODISCO_20v wrote:You'll probably find that anything that's adjustable even if it's TRD will need to be certified.


thats the impression i got from the certifier up here in auckland,
Current Rides: 1994 Hiace Custom
KTM 250sx

Previous Car: 1988 Toyota Levin 4agte
234kw atw and 12.5@183kmh
Sold to a muppit who wrecked it
Hmm
User avatar
IH8TEC
Toyspeed Member
 
Posts: 3128
Joined: Wed Nov 26, 2003 7:11 pm

Next

Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 30 guests