Toyspeed.org.nz Message Board

by **70ke25** » Sat Jun 12, 2004 6:13 pm

were should the timming marks match up on the timming chain on my 4k

by **qik20v** » Sat Jun 12, 2004 6:50 pm

whats timming?

is it timing?

by **Grrrrrrr!** » Sat Jun 12, 2004 7:48 pm

nah, its what dirty old men do to boys named timmy in the back of KE corollas

by **qik20v** » Sat Jun 12, 2004 7:52 pm

thats what i was afraid of :roll:

by **starlet drifter** » Sun Jun 13, 2004 7:43 pm

on the chain there should be two links that are a lighter colour than the rest. Match those two marks up with the dimple on the cam gear and the mark on the crank. Seriously a piece of piss

by **70ke25** » Sun Jun 13, 2004 8:00 pm

ok ok so my writing is bad cheers for the info

by **matt dunn** » Sun Jun 13, 2004 11:03 pm

starlet drifter wrote:on the chain there should be two links that are a lighter colour than the rest. Match those two marks up with the dimple on the cam gear and the mark on the crank. Seriously a piece of piss

Unless you are cheap and have bought a cheap aftermarket timing chain which don't have the shinny links.
Means you have to mark them with a vivid or similar. The shinny link are exactly at opposite ends of the chain. Mark a link count 16 links one way and mark it and 16 links the other way and mark it. Those two marks should be on the same link.

Matt

Toyspeed.org.nz Message Board

need info on timming on a 4k

need info on timming on a 4k

Who is online