4age 20v headbolts

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

4age 20v headbolts

Postby oldskool_rwd » Thu Feb 16, 2006 7:18 pm

hey does any1 know if the 20v headbolts are the same item as the 16v items as im after 20v arp head bolts and there is no listing for them only arp 16v head bolts listed so just wanted to know if they are the same items

cheerz peoples
User avatar
oldskool_rwd
Toyspeed Member
 
Posts: 71
Joined: Thu Oct 20, 2005 8:52 pm
Location: CHRISTCHURCH

Postby vvega » Thu Feb 16, 2006 7:20 pm

you will need 2 complete sets of 16v studs to make a single set of 20v ones

just buy them from toyota
there like 2 bucks a stud brand new

v
vvega
 

Postby oldskool_rwd » Thu Feb 16, 2006 7:24 pm

you cant buy arp head bolts from toyota read the post!!
User avatar
oldskool_rwd
Toyspeed Member
 
Posts: 71
Joined: Thu Oct 20, 2005 8:52 pm
Location: CHRISTCHURCH

Postby vvega » Thu Feb 16, 2006 7:31 pm

oldskool_rwd wrote:you cant buy arp head bolts from toyota read the post!!


look you $&#$% i asswered ya question
and unless you have 600 bucks to throw away on headstuds your shit out of luck

my sugestion
get OEM ones from toyota
many peole have run 20psi plush and had no issues

no thanks for that no
oh i really apreciate the help
just some $&#$% dissing teh free informam

v
vvega
 

Postby oldskool_rwd » Thu Feb 16, 2006 8:10 pm

..
Last edited by oldskool_rwd on Thu Feb 16, 2006 8:38 pm, edited 1 time in total.
User avatar
oldskool_rwd
Toyspeed Member
 
Posts: 71
Joined: Thu Oct 20, 2005 8:52 pm
Location: CHRISTCHURCH

Postby vvega » Thu Feb 16, 2006 8:15 pm

have you got 600 bucks for studs ??
v
vvega
 

Postby oldskool_rwd » Thu Feb 16, 2006 8:34 pm

yea i have whats $600 ontop of $13000 makes no difference :D

do u have $600? :wink:
User avatar
oldskool_rwd
Toyspeed Member
 
Posts: 71
Joined: Thu Oct 20, 2005 8:52 pm
Location: CHRISTCHURCH

Postby Mr Revhead » Thu Feb 16, 2006 9:43 pm

where did u try and source ARP from?
been a few months since i last checked but i think there is an ARP kit for the 20v.....

but as vega said you dont really need them. unless your planning mad boost
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Gadget » Thu Feb 16, 2006 10:13 pm

vvega wrote:have you got 600 bucks for studs ??
v

Damn that's expensive... even 2JZ ones are only US$140... Are you sure it's $600?!
User avatar
Gadget
Toyspeed Member
 
Posts: 884
Joined: Tue Aug 13, 2002 8:32 pm
Location: Hawkes Bay

Postby vvega » Thu Feb 16, 2006 10:32 pm

lol
you think im poor
bahahhahahaha

v
vvega
 

Postby vvega » Thu Feb 16, 2006 10:34 pm

Gadget wrote:
vvega wrote:have you got 600 bucks for studs ??
v

Damn that's expensive... even 2JZ ones are only US$140... Are you sure it's $600?!



nah there about 270 + frienght a set but you need 2 sets as the 16v ones have the offset lenghts and the 20v uses only the longer ones :D

v
vvega
 

Postby matt dunn » Thu Feb 16, 2006 10:35 pm

vvega wrote:
oldskool_rwd wrote:you cant buy arp head bolts from toyota read the post!!


my sugestion
get OEM ones from toyota
many peole have run 20psi plush and had no issues
v


That would be me too.
I run 18 to 20 psi and use genuine toyota head studs and head gasket and have never had a problem.


Gadget wrote:
vvega wrote:have you got 600 bucks for studs ??
v

Damn that's expensive... even 2JZ ones are only US$140... Are you sure it's $600?!


US $140 is NZ$210 ish, two sets of 16V to get enough studs, = $420 for 2JZ, and they are probably cheaper as they are more common is USA as they got the 2JZ there, but never got a 20V.

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby Mr Revhead » Fri Feb 17, 2006 9:30 am

$305 delivered for 20v ARP head bolts.
in the country too i beleive
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby oldskool_rwd » Fri Feb 17, 2006 4:29 pm

cheerz for the info

mr revhead can u give me contact or link for that info?

cheerz
User avatar
oldskool_rwd
Toyspeed Member
 
Posts: 71
Joined: Thu Oct 20, 2005 8:52 pm
Location: CHRISTCHURCH

rev

Postby ezy10s » Fri Feb 17, 2006 4:54 pm

Bolts, not Studs aye Rev?
Member #244
Gone fishing until further notice
ezy10s
Toyspeed Member
 
Posts: 1494
Joined: Tue Jun 11, 2002 5:18 pm
Location: auckland NZ

Postby Mr Revhead » Fri Feb 17, 2006 4:58 pm

um. probably studs! :lol:

oldskool, yes. ME :D
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

hmm

Postby ezy10s » Fri Feb 17, 2006 5:51 pm

Have you got some secret edition of arps catalogue or something? i can only find the 16v studs on their site
Member #244
Gone fishing until further notice
ezy10s
Toyspeed Member
 
Posts: 1494
Joined: Tue Jun 11, 2002 5:18 pm
Location: auckland NZ

Postby oldskool_rwd » Fri Feb 17, 2006 6:32 pm

i have had i look at the arp catalouge and yes they dont have a listing for the 20v and i hav been incontact with nz distributer and they are not advalible for the 20vs they dont make them apparently

thanks anywayz peoples
User avatar
oldskool_rwd
Toyspeed Member
 
Posts: 71
Joined: Thu Oct 20, 2005 8:52 pm
Location: CHRISTCHURCH

Postby Mr Revhead » Fri Feb 17, 2006 8:57 pm

according to the importer i spoke to today they have them in stock....
i think ill call again and ask for sizes to confirm......
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby ROBODISCO_20v » Sun Feb 19, 2006 5:14 pm

Mr Revhead how much for the genuine head bolt set?
I think i ended up using NZG one's on mine. ACL do them as well.
So oldskool_rwd you can get a set from pretty much any aftermarket parts shop in the country. Pionner do the APR bolts dont they?
User avatar
ROBODISCO_20v
Toyspeed Member
 
Posts: 599
Joined: Tue Jan 28, 2003 12:49 pm
Location: Manukau Toyota - Parts Dept

Next

Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 13 guests