rounded off nut on manifold

[Caldina3SGTE]

hey have rounded off nut trying to get a manifold off my car any ideas of how to get it off now kinda stumpted

thanks

[Mr_procrastination]

grab another nut and mig through the middle of it onto the old one.

[tsoob]

you can use this gasket stuff its like a fine metal paste, you put it on the ring spanner and it grips, it works really well, or if not then weld it.

[fangsport]

a bit rangi, but it works.
get either 1/2 mm smaller or slightly smaller imperial 6 point socket and drive it on with hammer.

[l1ttle_d3vil]

a bit rangi, but it works.
get either 1/2 mm smaller or slightly smaller imperial 6 point socket and drive it on with hammer.

worked many times. failing that, VICE GRIPS!!!!

[ChaosAD]

6 point impact socket has worked many times for me, will have to tap it on.

[xsspeed]

depends how rounded? otherwise had heaps of success with 6face sockets and "man" power

[Caldina3SGTE]

thanks dudes got it off, just got a samller size socket and bashed it on with a hammer,

[fangsport]

thanks dudes got it off, just got a samller size socket and bashed it on with a hammer,

chu-hu-hu cuz!