crank Trigger wheels

[ke25sr]

Can anyone here make or supply a 24 tooth crank trigger wheel and a sensor to suit.

I have a really stupid crazy fault that makes no sense, basically my ecu cant work out what one of the 4 teeth is TDC #1 so its making it real hard to start. as soon as its running its fine.

I reckon a 24 tooth trigger wheel missing a tooth will solve this and would like to know if anyone here can supply something

Thanks Y-all

[ChaosAD]

http://www.linkecu.com/products/InstallationAccessories/Sensors/triggerwheel

http://www.electromotive-inc.com/products/mag_sensors.html

http://trigger-wheels.com/store/

What ecu are you running? if its dizzy ignition then it shouldnt matter which tooth is tdc. otherwise you could probably remove 2 or three of the 4 teeth

[nz_climber]

The Toyota Altezza Beams 3sge engine use something similar to what you are after, here is a picture of it, its mounted to the crank pulley, and sensor just bolts underneath it (think it might be 36 teeth thou)..

[ke25sr]

http://www.linkecu.com/products/InstallationAccessories/Sensors/triggerwheel

http://www.electromotive-inc.com/products/mag_sensors.html

http://trigger-wheels.com/store/

What ecu are you running? if its dizzy ignition then it shouldnt matter which tooth is tdc. otherwise you could probably remove 2 or three of the 4 teeth

Its a Link G3, I know it shouldnt do it, it doesnt make sense, but going to a trigger wheel is going to be better anyway

[mr30%jr]

using wasted spark?

your dizzy only has one pick up? i know 4a have a 24 or whateva and you just cut one out realitive to no1 on the 4 spike pick up

[ke25sr]

using wasted spark?

your dizzy only has one pick up? i know 4a have a 24 or whateva and you just cut one out realitive to no1 on the 4 spike pick up

not sure if he wired it wasted spark. Should ask

Yeah i been trying to get my hands on one to try but not keen on spending a lot on a part i plan to pull apart cut up and possibly find i cant make work

Also have a engineer seeing if he can make me a new trigger wheel for inside the dizzy.

I am exploring all options

[ChaosAD]

Or remove two opposing teeth from the 24 tooth NE wheel and remove the G teeth and sensors

[Lloyd]

Silvertop dizzy still here...

[ke25sr]

Silvertop dizzy still here...

i got given a damaged one on saturday found it wouldnt work to easily

I buoght a trigger wheel and sensor from Link,

[mjrstar]

the 1g has 2 'wheels' in the CAS one give the rpm signal and the other is dedicated to giving the #1 tdc signal, seems to work well on my link plus.