Toyspeed.org.nz Message Board

by **bluemaumau** » Mon Nov 09, 2009 5:46 pm

anyone know what model 4age this is off? it may not even be 4age?

looking for a rail to suit my 16v with the inlet and outlets like this

by **jakesae101** » Mon Nov 09, 2009 5:58 pm

looks like a factory one thats been modified

by **bluemaumau** » Mon Nov 09, 2009 7:27 pm

nah its brendons car (IH8TEC) he said he got it off something, but cant remember, obviously the fittings are after market. but the inlet/outlet position is factory on that

my rails inlet/outlet are both on top. its a smallport item

by **jakesae101** » Mon Nov 09, 2009 7:30 pm

if i remember corectly it may be bigport 4age i have 1 somewhere ill look

by **bluemaumau** » Mon Nov 09, 2009 7:38 pm

cheers mate.

i think it might be 4agze actually looking at pictures on the net

by **Anth_555** » Mon Nov 09, 2009 7:55 pm

mines a bigport and its not the same as that

by **jakesae101** » Mon Nov 09, 2009 7:57 pm

ill look at my 4agze 2morow and get back to you

OMG so shiny! · by **Dell'Orto** » Mon Nov 09, 2009 11:05 pm

PM him and ask?

by **DeeCee** » Mon Nov 09, 2009 11:33 pm

reminds me of the honda fuel rails.. all nice and aluminium..

by **bluemaumau** » Mon Nov 09, 2009 11:59 pm

yea i was talking to him about it, but he cant remember.

looks alot cheaper than 90degree fittings, extra line, plus itll be tidier.

by **evil_si** » Tue Nov 10, 2009 7:21 am

you could always get your standard one modified to look like that,

by **IH8TEC** » Tue Nov 10, 2009 3:19 pm

it definitely looks the biz :lol:

can't remember what it's off aye. drilled that end closes to you in the pick and tapped it to suit whatever threads on that fitting, and got a m12 to -6AN? fitting on the other end

by **no_8wire** » Tue Nov 10, 2009 4:47 pm

Its a smallport fuel rail. or at least the connection positions look the same...

by **bluemaumau** » Thu Nov 12, 2009 1:01 pm

mine is smallport, and it doesnt look like that

anyone with a ze had a look?

anymore ideas?

by **Bazda** » Thu Nov 12, 2009 1:12 pm

I think its a ZE, my bigport ZE was like that.

Inlet on the side, but the outlet will always be on the top.

by **l1ttle_d3vil** » Thu Nov 12, 2009 1:19 pm

definitely off an AW11 4agze - thats what I've got. Fuel feed is at flywheel end, and return line comes out at the throttle body end.

by **jakesae101** » Thu Nov 12, 2009 1:22 pm

looks like bigport gze aswell

by **FLAWLES** » Thu Nov 12, 2009 1:35 pm

i am 90% sure i have one of those sitting dorment on my tool box at home, i will check later and post up my findings

by **~SlideWays~** » Thu Nov 12, 2009 2:10 pm

Be carefull with smallport vs bigport fuel rails because the injector spacing is different.

by **IH8TEC** » Thu Nov 12, 2009 2:57 pm

~SlideWays~ wrote:Be carefull with smallport vs bigport fuel rails because the injector spacing is different.

i found no such thing

Toyspeed.org.nz Message Board

fuel rail

fuel rail

Who is online