Toyspeed.org.nz Message Board

by **10k 20v** » Fri Mar 19, 2004 5:16 pm

Can anyone on here tell me the stock cam spec for a ae101 silvertop.

What i'm after is stuff like, duration, lift and lobe centres.

by **PRYMORTAL** » Fri Mar 19, 2004 5:26 pm

i found that stuff doing a search in google and yahoo, had to use Babblefish to translate the web pages (japanese), should try that but i'll see if i can find them again

by **AceSniper** » Sat Mar 20, 2004 4:43 pm

yea iv also seen the spec's on the net dont have time atm... but searching for "4age specs" brought it up somewere I think

by **mister2** » Mon Mar 22, 2004 10:46 am

bill sherwoods site has em.

from memory (like all info on the net... imho!) intake 250* 8.0mm lift inlet opens 0* closes 70* abdc (vvt: opens 30*btdc closes 40* abdc) exhaust 250* 7.6mm lift opens 54* bbdc closes 16* atdc.

check to be sure.

cheers

nick

by **10k 20v** » Mon Mar 22, 2004 6:46 pm

Cheers guy's, i lost my standard exhaust cam wheel and was trying to dial it in without sucsess. Hence the need to know.

by **matt dunn** » Fri Apr 30, 2004 7:17 pm

10k 20v wrote:Can anyone on here tell me the stock cam spec for a ae101 silvertop.

What i'm after is stuff like, duration, lift and lobe centres.

And also after std valve clearances for AE101 silvertop

Toyspeed.org.nz Message Board

Stock 20 valve cam specs?

Stock 20 valve cam specs?

1

Re: Stock 20 valve cam specs?

Who is online