Panel filter recommendation

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Panel filter recommendation

Postby GT4 20 » Sun Jun 20, 2004 8:00 pm

Any recommendations brand wise for a replacement panel filter for a '96 Celica? Don't want to go down the pod filter route.
Cheers
Gary
GT4 20
Toyspeed Member
 
Posts: 1086
Joined: Thu Jun 10, 2004 5:03 pm
Location: Auckland

Postby Al » Sun Jun 20, 2004 8:03 pm

I got a Tom's one off TRD Man.

Seems pretty good, you can actually hear my plumb back BOV now
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby flygt4 » Sun Jun 20, 2004 8:18 pm

i found the k+n drop in ones a good replacement too.noticeabe increase in induction noise so must be doing sumthing better.can also hear the shocking compressor surge now too :?
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby Al » Sun Jun 20, 2004 8:33 pm

flygt4 wrote:can also hear the shocking compressor surge now too :?


does the st185 not have the same bpv/bov as the mr2 turbo does?
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby flygt4 » Sun Jun 20, 2004 10:01 pm

no the 185 has no bov from factory at all.i thought all gen 2 3sgte's didnt hav one.tho the compressor surge is as loud as ur average bov anyway , can anyone say shattered turbine shafts.......
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby Al » Sun Jun 20, 2004 10:10 pm

Bugger. thought of tracking down a plumback from another car? they are pretty cheap
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby flygt4 » Sun Jun 20, 2004 10:15 pm

yeah there is no place to mount one without welding an adaptor onto the side of the intercooler.bout 2 inches of s curved pipe there,wuld be easier to go aftermarket if one was to install one.plus that hassle of piping a plumback in too. :?
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby Simon K » Sun Jun 20, 2004 10:27 pm

You can't go wrong with K&N panel filter replacement.
User avatar
Simon K
TS Wannabe
 
Posts: 1048
Joined: Thu May 30, 2002 6:06 pm
Location: Lambton quay perving...

Postby GT4 20 » Sun Jun 20, 2004 10:57 pm

Had a look on the web at the TRD ones - are they really that expensive? 8O

Looks like a K&N would be a good option then - cheers guys :D
Gary
GT4 20
Toyspeed Member
 
Posts: 1086
Joined: Thu Jun 10, 2004 5:03 pm
Location: Auckland

Postby Al » Sun Jun 20, 2004 10:58 pm

My Tom's one was around $100, thats a heap cheaper than the K&N's
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby Farmer_dave » Sun Jun 20, 2004 11:01 pm

hell yea thats way cheaper, i think the k&n is over 200, where you get the toms one from AL?
My Profile:
Now updated with a new pic
http://toyspeed.blakjak.net/profiles/profile.php?id=201

1997 Caldina GT-T
User avatar
Farmer_dave
Toyspeed Member
 
Posts: 425
Joined: Sat Apr 05, 2003 10:50 pm

Postby Farmer_dave » Sun Jun 20, 2004 11:02 pm

sorry just reread ur post it answered it for me.
My Profile:
Now updated with a new pic
http://toyspeed.blakjak.net/profiles/profile.php?id=201

1997 Caldina GT-T
User avatar
Farmer_dave
Toyspeed Member
 
Posts: 425
Joined: Sat Apr 05, 2003 10:50 pm

Postby Al » Sun Jun 20, 2004 11:06 pm

bling!

Image
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby GT4 20 » Mon Jun 21, 2004 8:54 am

Who supplies TOM's stuff in NZ?
Gary
GT4 20
Toyspeed Member
 
Posts: 1086
Joined: Thu Jun 10, 2004 5:03 pm
Location: Auckland

Postby TRD Man » Mon Jun 21, 2004 10:14 am

We do.
call us on 045701552 or email bsollitt@trdsales.com
User avatar
TRD Man
Toyspeed Member
 
Posts: 1414
Joined: Fri Feb 13, 2004 5:26 pm
Location: Lower Hutt

Postby GT4 20 » Mon Jun 21, 2004 11:54 am

TRD Man wrote:We do.
call us on 045701552 or email bsollitt@trdsales.com


E-mail sent. Look forward to your reply :D
Gary
GT4 20
Toyspeed Member
 
Posts: 1086
Joined: Thu Jun 10, 2004 5:03 pm
Location: Auckland

Postby Mr Revhead » Mon Jun 21, 2004 12:12 pm

are toms reusable?
id go for k&n yet to hear of anything better
as to $200 bugger that call me, i can beat that
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby GT4 20 » Mon Jun 21, 2004 12:31 pm

$200 was for a TRD one.
Gary
GT4 20
Toyspeed Member
 
Posts: 1086
Joined: Thu Jun 10, 2004 5:03 pm
Location: Auckland

Postby Mr Revhead » Mon Jun 21, 2004 12:33 pm

i think the k&n is over 200


i was referring to that one ^

still i reckon k&n if anyone has found something better id love to know.
remembering k&n are reusable so even if they cost twice the price of another brand, after 20-30 thou kays youv got ya money back...
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Farmer_dave » Mon Jun 21, 2004 8:29 pm

Yeah 230 bucks from from repco when I saked for a price.
My Profile:
Now updated with a new pic
http://toyspeed.blakjak.net/profiles/profile.php?id=201

1997 Caldina GT-T
User avatar
Farmer_dave
Toyspeed Member
 
Posts: 425
Joined: Sat Apr 05, 2003 10:50 pm

Next

Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot] and 54 guests