A cople of q's...

[skoty]

1) Is the first generation 4age fitted in ae82 rollas supposed to have a diagnoisis port!? I dont know whether they are meant to have one or somebody that previously owned my car removed it! I noticed my mates ae92 fxgt has one The diagnosis port is usally mounted on the strut tower and has another module mounted on the firewall. The reason being is i need to do a self-diagnois on my engine as it aint running rite but my car doesn't appear to have one, things then get pretty tricky!!!

2) Oxygen sensors - these sensors are supposed to monitor the amount of oxygen content in the exhaust gases and adjust the fuel/air mixture accordingly. How important are these sensors cuz not all first gen 4age's such as mine have them, why is that? Could that explain why my car still is running too rich???

[EVLGTZ]

in regards to 2, if its an NZ new one then it wont have the O2 sensor but it will have a mixture adjustment unit that you can play around with if ya feel the need.

[THA SHZ]

in regards to question 1 u don't have a diagnosis port that is labelled like the 1 in ae92 but u will have a plug hanging sumwhere by the firewall and strut on the left hand side which when u bridge 2 pins of the plug together and turn off the car and then turn it on again it will give u a fault code flashing with ur engine light in the dash of ur car .
From this u count how many flashes u have and it will give a fault code , if there is any .
The 2 pins that short together are te1 and e1 on the check connector which is what that plug is called.
Hope this answers ur question or helps

[skoty]

in regards to question 1 u don't have a diagnosis port that is labelled like the 1 in ae92 but u will have a plug hanging sumwhere by the firewall and strut on the left hand side which when u bridge 2 pins of the plug together and turn off the car and then turn it on again it will give u a fault code flashing with ur engine light in the dash of ur car .
From this u count how many flashes u have and it will give a fault code , if there is any .
The 2 pins that short together are te1 and e1 on the check connector which is what that plug is called.
Hope this answers ur question or helps

hmmm.... I aint seeing that plug anywhere What type of connector is it, I can't even find it on my spare 4age wiring harrness.

[skoty]

BTW... I know how to do the self-diagnoisis I just need to know where the god dam plug is

[skoty]

Ideas plz! Somebody on here must of electronically diagnoised a bluetop b4

[Leon]

hmmm, damn, I had an AE82 GT, and did the codes on it ... I am thinking it was a very obvious plug in the engine bay. But this is going back about 7 years though.

[skoty]

hmmm, damn, I had an AE82 GT, and did the codes on it ... I am thinking it was a very obvious plug in the engine bay. But this is going back about 7 years though.

Think hard!

[THA SHZ]

Yellow plug , round barrel shape , 2 pin and comes out of the loom just after it has entered through the firewall .
Short these 2 together.

[skoty]

Yellow plug , round barrel shape , 2 pin and comes out of the loom just after it has entered through the firewall .
Short these 2 together.

Thanks, did the diagnosis

Now what does one flash every 6 secs mean...

[EVLGTZ]

Yellow plug , round barrel shape , 2 pin and comes out of the loom just after it has entered through the firewall .
Short these 2 together.

Thanks, did the diagnosis

Now what does one flash every 6 secs mean...

try

http://www.club4ag.com/faq and tech_pages/ECU diagnostic codes.htm