what trim?

[IH8TEC]

hey, jsut wondering how i can find out what trim my compressor wheel is on my t3 turbo. any way without taking it apart, it has .36 exhaust a/r and .42 compressor a/r,

http://www.7thgencivic.com/forums/showt ... 883&page=1 most useful thing i've found so far.

it does have a steel wheel. and on the compressor wheel, it has one big fin, and a lil one next to it, and so on and so on arount it.

basically jsut trying to work out how much boost it could run safely. i've looked heaps on the internet but can't find anything. it will be going in for a rebuild before i put it on, good things take time.

any good ways to tell or helpful links would be great

cheers,
brendon

[Bazda]

most t3 types can only run up to 14psi, but there are some other ones out there that could run more but i'm not really sure

[vvega]

its all about shaft speed
woring out how many cfm is requied at what rpm and what the turbo can deliver


http://not2fast.wryday.com/turbo/maps/#garrett
find ya compressor map

http://wolfkatz.com/DreamweaverDocs/Com ... 0Small.pdf
then useing this as a guide
work it out

good amount of info from those 2 sites avalible

you sould have a good understanding after reading

v