KP Starlet questions.

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

KP Starlet questions.

Postby RomanV » Fri Oct 14, 2005 1:03 pm

Ive just picked up a 4 door KP60 with a 4K in it. :P

It is GREAT fun to drive. Nowhere *near* as fast as the MR2, but *far* more fun. :)
Anyway, I have a few questions.

1. The steering wheel sucks. Its like a thin peice of wire with plastic wrapped around it. :? Are there other Toyota steering wheels that will fit? Preferably something smaller and more rigid. And cheap. :mrgreen:

2. The seats are CRAP. You cant go around a corner without sliding off your seat. Are there any other seats which bolt in, which are a little better? I think Ive heard of people using AW11 seats, or AE92 seats?

3. Do all K40/K50 gearboxes have the same gear ratios?

4. What diff ratios are there? Ive still got the low ratio diff that I think came with the 2k motor that was originally in the car.
User avatar
RomanV
Toyspeed Member
 
Posts: 4915
Joined: Wed Aug 13, 2003 12:17 am
Location: West Auckland

Re: KP Starlet questions.

Postby bad20v » Fri Oct 14, 2005 1:16 pm

RomanV wrote:1. The steering wheel sucks. Its like a thin peice of wire with plastic wrapped around it. :? Are there other Toyota steering wheels that will fit? Preferably something smaller and more rigid. And cheap. :mrgreen:


Yeah... Nah. Just get a cheap one off Tard Me. I got one that was only $25 for mine and it came with a Boss Kit too. :D

RomanV wrote:2. The seats are CRAP. You cant go around a corner without sliding off your seat. Are there any other seats which bolt in, which are a little better? I think Ive heard of people using AW11 seats, or AE92 seats?


Put them out and throw them away. Get some FX-GT seats or something as comfortable for replacements. I don't think they will just bolt straight in but you should be able to make new rails or adapt them to fit properly. :D

RomanV wrote:3. Do all K40/K50 gearboxes have the same gear ratios?


Pass. i dunno. :(

RomanV wrote:4. What diff ratios are there? Ive still got the low ratio diff that I think came with the 2k motor that was originally in the car.


Pass again. I just use it for skids at the motorkana's mostly. :P If it breaks I have another one that is a donor car, same model, that I pull parts off. :D
Your Opinion Means 1/16th Of Stuff All To Me So Dont Bother Arguing With Me About It As I Just Dont Care.

Thank-You.
User avatar
bad20v
Toyspeed Member
 
Posts: 1911
Joined: Thu Dec 09, 2004 8:25 pm
Location: With Master Yoda Smoking Doobies I am.

Postby RE20 » Fri Oct 14, 2005 1:23 pm

For seats, can you weld? do a little fab? If not a good mechanic will be able to do it prob cost a couple of hours labour talk to them nice and you might get a deal :wink: I have GTX seats in mine and its great :D
In the event of nuclear catastrophe, the only survivors will be Cockroaches and Toyota K series engines...
pervert wrote:Haha, it's not low enough, it still has suspension travel!!!
User avatar
RE20
Toyspeed Member
 
Posts: 391
Joined: Tue Jan 28, 2003 6:34 pm
Location: Palmy, NZ

Postby Dell'Orto » Fri Oct 14, 2005 6:07 pm

I believe K40's and K50's share the same ratios, and the auto diff's are the really low geared ones.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby fangsport » Fri Oct 14, 2005 6:52 pm

one of the early Corollas had different ratios in it, maybe KE25.
good luck finging one , as the race/rally boys have killed most of them.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby QikStarlie » Fri Oct 14, 2005 6:55 pm

seats out of the sprint model are a whole lot better
User avatar
QikStarlie
Toyspeed Member
 
Posts: 1110
Joined: Tue Mar 25, 2003 10:30 pm
Location: lost..

Postby MikeMan » Sun Oct 16, 2005 9:40 pm

MikeMan
Toyspeed Member
 
Posts: 140
Joined: Wed Jun 22, 2005 3:16 pm


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 13 guests