silvertop 20v with oil catch can

[deaf_rattle]

I presume i just whack it inline with the line from the cam cover to the intake pipe?

Any issues with doin this?

Also i am thinking in the long term, of installing a fibreglass ae92 gtz bonnet scoop and a top mount oil cooler, any issues with doin that?

20v into ae92 fxgt

[Mr Revhead]

i found the catch can a lot more effective when its taken from the hose thats off the back of the cam cover to the inlet manifold. just make sure you block off the hose to the inlet properly

i run a can with a filter on top and feed both lines into it, catchs oil, but also a huge amount of water....

[AceSniper]

look at my profile pic think u can see how mines done?
run hose off pcv to the can, block the other side of it with a pipe an bolt onto the inlet, run a hose from the end of the cover to the can, block the hole into the intake hose

[Mr Revhead]

hard to see, sounds exactly like mine

[ROBODISCO_20v]

Any one else got some pics??

[AceSniper]

ill get more on sunday if need be?

[deaf_rattle]

yeah, that would be great

cheers man

[AceSniper]