sony CDXMP50 head unit wiring

[l1ttle_d3vil]

I've got a CDX MP50 head unit I need to wire up. Can anyone identify the colour wires for me please? I don't have a diagram and can't find any info on the net...
This is an older unit, 2004 model I think.

thanks.

* White - Speaker
* Green -
* Purple -
* Grey - Speaker
* Blue/White - Has "AMP REM MAX 0.3A" sticker on it
* Blue - Has "ANT REM MAX 0.1A" sticker on it
* Red - IGN +? Can anyone confirm this?
* Black - Earth

* White/Black - Speaker
* Green/Black
* Grey/Black - Speaker
* Purple/Black
* Light blue - Has "ATT" sticker on it
* Yellow - Batt? Can anyone confirm this?

[AJz]

yellow = batt
red = ign
black = ground

normal blue = antena power
blue/white = amp power

white & white/black = front speaker (pos & neg)
grey & grey/black = front speaker (other one, pos & neg)
purple & purple/black = rear speaker (same as above)
green & green/black = rear speaker (same as above)

light blue = not sure

[Mr.Phreak]

* White - FL +
* White/Black - FL -
* Green - RL +
* Green/Black - RL +
* Purple - RR +
* Purple/Black - RR -
* Grey - FR +
* Grey/Black - FR -
* Blue/White - Remote Power
* Blue - Aerial Power
* Red - ACC
* Black - Ground
* Light blue - Mute
* Yellow - Constant +12v

[l1ttle_d3vil]

thanks for that. just two Im still not sure of.

* Light blue - Mute? Whats that for? Is that so it mutes when you press that on the remote or what? If so, I don't have a remote so won't bother with that.

* Blue/white - remote power or amp power?

[Alex B]

mute is for connectiong to a wired in phone etc, or you can wire it to a mute switch, can be quite handy

[l1ttle_d3vil]

so basically I can wire it into a switch that I can flick if I want to mute the stereo? how does it work? does it just need to run to an earth or something?

[Alex B]

yeap run it to an earth.