3SGE faster than 3SGTE ? LOL lets discuss this ~~

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby 99gtt » Tue Feb 21, 2006 5:28 pm


Are you dead sure it was an m3, there are alot of lookalikes around out there and not many real m's. Making a standard 325/8 look like an m isn't all that hard imho - and yes it should have been as fast as an mr2 with a bleed tap, and a hell of a lot more reliable, depending on what your bleed tap had upped the boost to. Oh and na cars almost always feel slow, did you do an objective test on them or just the ultra relaible seat of the pants ometer standard??
What turbo imports would an M3 or m5 beat. There is alot of competition out there evo's, skyline gtr, supra ,gt4 and i would even go as far to say the new civic type r with 225 hp stock would give an m3 a run for his money. Sh-t little banzai cleaned up a late model m3 and the whole car cost less than 17'000
SOON TO BE 500 HP
User avatar
99gtt
Toyspeed Member
 
Posts: 336
Joined: Tue Aug 24, 2004 6:13 pm
Location: auckland

Postby scotts2hot » Tue Feb 21, 2006 7:30 pm

99gtt wrote:

Are you dead sure it was an m3, there are alot of lookalikes around out there and not many real m's. Making a standard 325/8 look like an m isn't all that hard imho - and yes it should have been as fast as an mr2 with a bleed tap, and a hell of a lot more reliable, depending on what your bleed tap had upped the boost to. Oh and na cars almost always feel slow, did you do an objective test on them or just the ultra relaible seat of the pants ometer standard??
What turbo imports would an M3 or m5 beat. There is alot of competition out there evo's, skyline gtr, supra ,gt4 and i would even go as far to say the new civic type r with 225 hp stock would give an m3 a run for his money. Sh-t little banzai cleaned up a late model m3 and the whole car cost less than 17'000


It depends what you mean by beat? And also what M3's and M5's you're talking about. You realise the new M5 has 500hp right?

Personally I'd take the beemers by miles.
scotts2hot
Toyspeed Member
 
Posts: 141
Joined: Fri Mar 05, 2004 6:29 pm
Location: Palmerston North

Postby Adamal » Tue Feb 21, 2006 7:36 pm

scotts2hot wrote: You realise the new M5 has 500hp right?

Personally I'd take the beemers by miles.


And 520nm of torque and a $220K price tag to boot ;)
Motorsport is like sex. You could take it to track and have a long, enjoyable session, or you could take it to the strip and get it over with in less than 20 seconds.
User avatar
Adamal
Toyspeed Member
 
Posts: 11592
Joined: Sun May 02, 2004 4:01 pm
Location: Waitakere Drift Stage (Ranges)

Postby gt-trainer » Tue Feb 21, 2006 9:11 pm

You are talking about a car that in worked form could and did blitz holden and fords best in the day, they were scared enough by the power of a 4 cylinder M3 that they banned them outright just like the cosworths.

Why are you comparing Jap to euro anyway? Were talking about a refined vehicle in a different weight and price bracket. Why do these threads lead to comparisons from way outside the realm of the topic.
User avatar
gt-trainer
Toyspeed Member
 
Posts: 175
Joined: Fri Sep 03, 2004 11:11 pm
Location: auckland

Postby barryogen » Wed Feb 22, 2006 7:09 am

snwtoy wrote:
barryogen wrote:
jiranz5 wrote:As for the topic, it would be difficult for any N/a ports car to keep up with a turbo sports car unless it had some MAJOR work done to it


Stock-ish(cold air and exhaust only) Corolla Runx is approximatly the same performance as a stock Caldina GT-T... atleast until you hit hills :cry: I guess it's the extra torque.


Shhhhhhhhh!! Now you'll have all the boyracers wanting one!!


well they(RunX and Allex) are technically the replacements for the Trueno and Levin, they're sold as that somewhere in the world(found marketing shots etc online somewhere).
User avatar
barryogen
2ZZ Guru in training
 
Posts: 2692
Joined: Thu Oct 13, 2005 8:38 am
Location: Dunedin

Postby barryogen » Wed Feb 22, 2006 7:11 am

gt-trainer wrote:Why do these threads lead to comparisons from way outside the realm of the topic.


so that each person can say that they won.... you take a simple generic comparison, and as each of your arguements gets challenged, you move the goal posts slightly, in the end the arguement and who one doensn't matter, but each feel better for it, because "they won".

If you're at varsity, do some psyc papers, bloody funny.
User avatar
barryogen
2ZZ Guru in training
 
Posts: 2692
Joined: Thu Oct 13, 2005 8:38 am
Location: Dunedin

Postby XERO » Wed Feb 22, 2006 9:53 am

snwtoy wrote:
barryogen wrote:
jiranz5 wrote:As for the topic, it would be difficult for any N/a ports car to keep up with a turbo sports car unless it had some MAJOR work done to it


Stock-ish(cold air and exhaust only) Corolla Runx is approximatly the same performance as a stock Caldina GT-T... atleast until you hit hills :cry: I guess it's the extra torque.


Shhhhhhhhh!! Now you'll have all the boyracers wanting one!!


Hmm is barry giving out good ideas?? Just a quick question, whats the best exhaust setup for a 3SGE Beams? Incl Headders and Intake?
Image
Altezza RS200 Z Edition
For performance parts :: www.drivenperformance.co.nz
User avatar
XERO
Toyspeed Member
 
Posts: 1080
Joined: Thu Jun 16, 2005 6:22 pm
Location: Auckland :: West

Postby RomanV » Wed Feb 22, 2006 10:11 am

Pheonix power in Japan make headers for the fwd beams motor. Pair that up with a 2 1/2 inch pipe coming out just behind the left hand side front wheel. :D

EDIT:

Oh, and we can swap throttle bodies so you can do a MAP conversion, and then you wont need that silly airbox, and you can give it to me. :twisted:
User avatar
RomanV
Toyspeed Member
 
Posts: 4915
Joined: Wed Aug 13, 2003 12:17 am
Location: West Auckland

Postby barryogen » Wed Feb 22, 2006 11:01 am

XERO wrote:
snwtoy wrote:
barryogen wrote:
jiranz5 wrote:As for the topic, it would be difficult for any N/a ports car to keep up with a turbo sports car unless it had some MAJOR work done to it


Stock-ish(cold air and exhaust only) Corolla Runx is approximatly the same performance as a stock Caldina GT-T... atleast until you hit hills :cry: I guess it's the extra torque.


Shhhhhhhhh!! Now you'll have all the boyracers wanting one!!


Hmm is barry giving out good ideas??


don't be silly, I don't give out good ideas, just hair-brained schemes, and some odd ideas for projects... once I get better at welding, I might start tinkering with making something myself.
User avatar
barryogen
2ZZ Guru in training
 
Posts: 2692
Joined: Thu Oct 13, 2005 8:38 am
Location: Dunedin

Postby XERO » Wed Feb 22, 2006 11:47 am

RomanV wrote:Pheonix power in Japan make headers for the fwd beams motor. Pair that up with a 2 1/2 inch pipe coming out just behind the left hand side front wheel. :D

EDIT:

Oh, and we can swap throttle bodies so you can do a MAP conversion, and then you wont need that silly airbox, and you can give it to me. :twisted:


So you want my airbox and throtle body eh? hmmmmmmmmmmmmmmm :? maybe if you want it so bad, it must be ok?
Image
Altezza RS200 Z Edition
For performance parts :: www.drivenperformance.co.nz
User avatar
XERO
Toyspeed Member
 
Posts: 1080
Joined: Thu Jun 16, 2005 6:22 pm
Location: Auckland :: West

Postby RomanV » Wed Feb 22, 2006 12:29 pm

Throttle bodies are identical as far as I am aware, but mine has a thread tapped into it for a MAP sensor. as it used to run one with an aftermarket computer. (as opposed to the factory hot wire airflow meter)

And if I had my standard airbox, I'd be using it! But since I dont, it's a pod filter for me.

I'm skeptical of any performance advantage, but it should sound cool at least. :)
User avatar
RomanV
Toyspeed Member
 
Posts: 4915
Joined: Wed Aug 13, 2003 12:17 am
Location: West Auckland

Postby varix » Wed Feb 22, 2006 4:25 pm

-FULL BODY KIT - WITH SS3 SIDESKIRTS

That would add like 100kw easily....
User avatar
varix
Toyspeed Member
 
Posts: 131
Joined: Sat Nov 12, 2005 2:29 pm
Location: Christchurch

Postby dougsop » Wed Feb 22, 2006 6:54 pm

-FULL BODY KIT - WITH SS3 SIDESKIRTS

That would add like 100kw easily....


yep totally agree with another few TRD sticker or HKS he will make 5hp per sticker easy 200kw @wheel WOW

:lol:
dougsop
Toyspeed Member
 
Posts: 173
Joined: Wed Feb 08, 2006 9:48 pm

Postby Timmo » Fri Feb 24, 2006 11:30 am

Best Motoring compared the M5 (5 speed manual) and a Mercedes 500E (auto) against the Toyota Aristo V (the older shape one with the non VVT-i 2jz-gte) with an auto on a slightly damp track in 92 (I think the track was Tskuba....not sure) and the Aristo was faster around it than both the BMW (2nd) and Merc (3rd).....

I have a video on my computer (also Best Motoring) racing a new Skyline 350 GT a 350Z (almost the same car really) against the M3 (latest version with the 3.2 six)....i cant remember the exact times but they were all about equal around that track.

The thing with Japanese cars (especially the larger ones that arent sold outside the JDM) is that the press releases/hype doesnt seem to get outside of Japan.....notice all the talk about every new little revision to Ford and Holden products in our motoring magazines?.....no mention of JDM cars (Not suprisingly really as they arent sold new outside Japan)....Japan makes some very fast sports sedans and has done for sometime....just not many people know about them ;)

I hear that Toyota NZ is introducing a large sedan later this year....Im hoping its the Crown series!!! (I doubt we will get the 243KW 3.5 V6 option though :(
Lightweight baby
1991 MX5 Supercharged
Timmo
Toyspeed Member
 
Posts: 707
Joined: Thu Jan 26, 2006 10:44 am
Location: Tauranga/Mount

Previous

Return to General Car Discussion

Who is online

Users browsing this forum: Google [Bot] and 47 guests

cron