Toyspeed.org.nz Message Board

by **oldskool_rwd** » Thu Apr 27, 2006 5:32 pm

as above want a chassis number that a vehicle came out factory with w55 series box as i need the slave cylinder part number to buy 1 for my project

cheerz peoples

by **Mr Revhead** » Thu Apr 27, 2006 5:56 pm

MA61 about $50

by **oldskool_rwd** » Thu Apr 27, 2006 6:00 pm

cheerz

whats that vehicle tho,thanks

Website · by **Rick** » Thu Apr 27, 2006 6:02 pm

oldskool_rwd wrote:cheerz

whats that vehicle tho,thanks

old supra

by **oldskool_rwd** » Thu Apr 27, 2006 6:31 pm

cheerz rick

by **deaf_rattle** » Thu Apr 27, 2006 6:33 pm

Mr Revhead wrote:MA61 about $50

what ma61 came out with a w55?

by **nite b** » Thu Apr 27, 2006 6:52 pm

Ask for a 74969097 slave cyl if yours sits on the passenger side...

If on the drivers side then ask for a reverse imaged one...

There are a few that will go on.

by **oldskool_rwd** » Thu Apr 27, 2006 7:12 pm

cheerz nite b

yea its for on the bell housing i got of you 4ag/w55 so slave is on drivers side

so 74969097 but a reversed 1 will be the 1 im after then?

thanks

by **Mr Revhead** » Thu Apr 27, 2006 7:44 pm

what ma61 came out with a w55?

the first one i looked at on the epc

by **deaf_rattle** » Thu Apr 27, 2006 7:47 pm

wierd, mustve been one with a mteu as the rest came out with W57s or w58s

by **Mr Revhead** » Thu Apr 27, 2006 7:54 pm

nope, 5mge

by **deaf_rattle** » Thu Apr 27, 2006 8:09 pm

i would nearly go as far as saying thats incorrect.
i am yet to see one with a w55 in it

by **Mr Revhead** » Thu Apr 27, 2006 10:39 pm

well it was just the first one i looked at..... import ma61 with 5mge

by **ps165** » Thu Apr 27, 2006 11:14 pm

i have a spare slave if ur after one, was bolted to a m bellhousing. i would image their quite cheap new, tho

by **oldskool_rwd** » Fri Apr 28, 2006 11:12 pm

ps165 you have pm

Toyspeed.org.nz Message Board

chassis number for vehicle factory with w55 please

chassis number for vehicle factory with w55 please

Who is online