Corolla Engine replacement question...

General discussions on all non technical car related topics

Moderator: The Mod Squad

Corolla Engine replacement question...

Postby GTCRSHR » Fri Sep 15, 2006 12:02 am

Right ... just thinking a biut more about engine transplants for the corolla (ae101) as its edging closer to the end ....

what are the pros / and cons of each of these :

which has the most potential

Option A. A custom built 7agte

Option B. a 2ZZGZE ?(is that theone) the new celica/corolla engine with the supercharger kit on it ...

Option C. a version of the 3sgte Front wheel drive


Car is for show, and street use, may take it down the strip for shits and giggles
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby RS13 » Fri Sep 15, 2006 12:16 am

A: 7AGTE, I like the idea of a "big block" turbo'd A-series motor..

B: These motors are relatively hard to get, quite expensive still, and from what I've read, not too reliable either.

C: Probably the most cost-effective, making up the mounts/driveline would probably be the hardest part, 3SGTEs are everywhere, run a FWD 3S box, you're away, I'd say at a guess, a LOT easier to get power from than a 7AGTE, and a damn sight cheaper. My pick of the bunch. :)
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Postby Bazda » Fri Sep 15, 2006 12:20 am

blah blah everyone now wants one :roll:
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby GTCRSHR » Fri Sep 15, 2006 12:26 am

Bazda wrote:blah blah everyone now wants one :roll:


how much to build me one then ....

im guessing in the 3 sgte route i would just be cheaper to buy a doner car and transplant the whole lot over ?
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby Bazda » Fri Sep 15, 2006 12:27 am

from scratch I would say $7k-9k in parts no labour, thats my setup.


depends how far u wana take the 7agte
Last edited by Bazda on Fri Sep 15, 2006 12:33 am, edited 1 time in total.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby GTCRSHR » Fri Sep 15, 2006 12:33 am

Bazda wrote:from scratch I would say $7k-9k in parts no labour, thats my setup.


how much for the labour ... the engine ready for me to "bolt in"
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby Bazda » Fri Sep 15, 2006 12:37 am

GTCRSHR wrote:
Bazda wrote:from scratch I would say $7k-9k in parts no labour, thats my setup.


how much for the labour ... the engine ready for me to "bolt in"


now thats a hard one. I could only build it and then tell u lol.
If you are really keen on one email me.

b.manon@xtra.co.nz
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby GTCRSHR » Fri Sep 15, 2006 12:39 am

Bazda wrote:now thats a hard one. I could only build it and then tell u lol.
If you are really keen on one email me.

b.manon@xtra.co.nz



cheers at this stage its more a case of figureing out which is the best route to go

in the beginning i wanted to go 3sgte with the 4wd.... would be great for a conversion, but impractical ... i could never use it to its full potential

hence the reason for Fwd now ...: :oops:

is there any one that has done a ae101levin or corolla conversion with 3sgte ?
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby Bazda » Fri Sep 15, 2006 12:41 am

there is a way cheaper way to do the 7agte but u wont get qutie as much power as i have.
building a engien from scratch costs more than buying a engine and sticking it in, unless u can build engines.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby no_8wire » Fri Sep 15, 2006 8:02 am

my 7agte is still going to cost around $6...and im not going as extreme as bazda either...
User avatar
no_8wire
Toyspeed Member
 
Posts: 2268
Joined: Thu Dec 30, 2004 7:30 pm

Postby Jazza » Fri Sep 15, 2006 8:46 am

I want a $6.00 engine :cry:
1996 Curren - On Tardme
1992.5 EG Civic - 101kw@wheels. WTB 4x100 6.5in wide rims.
User avatar
Jazza
Toyspeed Member
 
Posts: 1355
Joined: Fri Jan 20, 2006 5:56 pm
Location: Oakland

Postby Silent Knight » Fri Sep 15, 2006 9:36 am

Jazza wrote:I want a $6.00 engine :cry:


Yea but you are a pussy and you drive a FWD.
A bloody Curren at that as well. :?
Image
User avatar
Silent Knight
Toyspeed Member
 
Posts: 6188
Joined: Tue Aug 05, 2003 12:30 am
Location: 'Save the Whale Foundation'

Postby Mr Revhead » Fri Sep 15, 2006 10:22 am

7agte is cool, easier to fit in but requires work to make

2zzge is a good engine, dont worry about net rumours. this wil cost he most to buy AND to fit, exhaust etc wil cause a few issues. however imo itl lbe the coolest. isnt your car a show car? 2zzge would be the most WOW factor

unless.....

you went for the 3sgte WITH 4wd. that would be awesome.
if you kept the 3sgte and fwd.... well that would be my last choice.

as for which woul dbe the cheapest.....
toss up between the 3sgte fwd and 7agte.
7agte could be done cheaper, depends on how far you take it
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby soopachargen » Fri Sep 15, 2006 10:59 am

How would a fwd 3sgte affect the cars handling?? I'm pondering the same question as Chris at the moment.
When in doubt, down and out.

"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
User avatar
soopachargen
Toyspeed Member
 
Posts: 1598
Joined: Thu Aug 05, 2004 1:54 pm
Location: Silverdale

Postby GTCRSHR » Fri Sep 15, 2006 11:43 am

revehead...

yep car is goign to be a show car/ sunday driver

what are the main problems / weakness's with the 2zz and by adding the supercharger kit what problems does this introduce (where is the engine most likely to fail)

the only down side i see with the 3sgte + 4wd (appart from what i mentioned above) is getting it certified... what issues are there goign to be ?
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby Chickenman » Fri Sep 15, 2006 11:45 am

4afte?


Cheap as chiiips,


Once you had the manifold and turbo you could start a graveyard of exploded 4afe's

Can keep current driveline although it will explode as well.
Baby Jesus
User avatar
Chickenman
I Am The Walrus!
 
Posts: 3554
Joined: Thu May 29, 2003 11:29 am
Location: CHCH

Postby Dell'Orto » Fri Sep 15, 2006 11:48 am

Getting it certified will be the LEAST of your worries :lol:

I'm with Warwick on this one, a 2ZZGE would be a very impressive transplant. Maybe not as quick as the others, but definately original. I guess the only problem with that will be that half the people who see it wont know what it is :lol:
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby soopachargen » Fri Sep 15, 2006 11:48 am

KFC he's got a silvertop in it at the moment...
When in doubt, down and out.

"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
User avatar
soopachargen
Toyspeed Member
 
Posts: 1598
Joined: Thu Aug 05, 2004 1:54 pm
Location: Silverdale

Postby eritate » Fri Sep 15, 2006 11:50 am

Id like to see the ae101 converted to 3sgte 4wd

What about someting like a 1jz ? with a lot of modifciation :P

But yer the 2Z is original but the 3sgte 4wd is WOW
I am a timewaster. Ignore anything I say
User avatar
eritate
Toyspeed Member
 
Posts: 736
Joined: Thu Feb 17, 2005 9:14 pm
Location: Palmy North

Postby Chickenman » Fri Sep 15, 2006 12:07 pm

soopachargen wrote:KFC he's got a silvertop in it at the moment...


Who you calling KFC :o

Silvertop or not... how does that make my suggestion any less valid?
Baby Jesus
User avatar
Chickenman
I Am The Walrus!
 
Posts: 3554
Joined: Thu May 29, 2003 11:29 am
Location: CHCH

Next

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 20 guests

cron