LSD?
Moderator: The Mod Squad
48 posts
• Page 3 of 3 • 1, 2, 3
by flygt4 » Thu Jan 25, 2007 8:58 pm
i have 2 e51's on my garage floor now
it appears that ae92 gtz E51 most likely non-lsd has a hole about 25mm diameter you can see right through the axle holes.
ae92 gtz E51 definately lsd has a hole about 10mm diameter you can see right through the axle holes.
it appears that ae92 gtz E51 most likely non-lsd has a hole about 25mm diameter you can see right through the axle holes.
ae92 gtz E51 definately lsd has a hole about 10mm diameter you can see right through the axle holes.
-
flygt4 - Toyspeed Member
- Posts: 3820
- Joined: Sat Sep 20, 2003 6:57 pm
- Location: Wellington
by crispy'86 » Fri Jan 26, 2007 7:07 am
now that's a definite answer we allw ant to hear, time to get measuring
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
-
crispy'86 - ** Moderator **
- Posts: 3548
- Joined: Thu Jul 03, 2003 11:27 pm
- Location: Chch
by flygt4 » Fri Jan 26, 2007 10:41 am
havent done exact measure yet, thats just a quick visual sizing up. will get round to it this weekend, but its like the difference between a 5/10c piece and a 20c piece. if you have them both to compare the difference is clear.
still to confirm 100% that the other box isnt lsd, but id think it most likely is not.
still to confirm 100% that the other box isnt lsd, but id think it most likely is not.
-
flygt4 - Toyspeed Member
- Posts: 3820
- Joined: Sat Sep 20, 2003 6:57 pm
- Location: Wellington
by TRD_ZERO » Fri Jan 26, 2007 3:06 pm
Ill give mine a measure but you can kinda see the difference in the photos posted that the one with the smaller hole diameter is the lsd one and the non lsd one had the larger hole.
-
TRD_ZERO - Toyspeed Member
- Posts: 1077
- Joined: Sun Jul 16, 2006 12:24 pm
- Location: Howick
by crispy'86 » Sun Feb 04, 2007 8:43 am
had a look at my ae92 boxes and they both have the smaller hole about 10mm diameter, and when you look up close it seems you can see what appears to be a small bolt on the inside of the unit , guessing lsd's where the axle goes through the plate is about 10-15mm thick too. What i noticed when i looked up close at them
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
-
crispy'86 - ** Moderator **
- Posts: 3548
- Joined: Thu Jul 03, 2003 11:27 pm
- Location: Chch
by Mr Revhead » Sun Feb 04, 2007 9:58 am
just a point...
a TRD plate type LSD will have a clear hole right through
the C series TRD helical LSD has a little plate in the axle holes so you cant see through it
a TRD plate type LSD will have a clear hole right through
the C series TRD helical LSD has a little plate in the axle holes so you cant see through it
-
Mr Revhead - SECURITY!
- Posts: 24635
- Joined: Tue Jan 20, 2004 4:06 pm
- Location: Nelson
by crispy'86 » Thu May 10, 2007 10:43 pm
I'm going to pull my gtz gearbox down very shortly so will be able to take pics step by step and take note especially where the axle goes through the splines, watch this space
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
-
crispy'86 - ** Moderator **
- Posts: 3548
- Joined: Thu Jul 03, 2003 11:27 pm
- Location: Chch
48 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 0 guests