Aftermarket Steering Wheel Horn Button Question

[haydo]

I bought a new steering wheel as below:



I've installed one before but this one is slightly different. It has two horn buttons as pictured and I don't know how to connect it up as both sides have a very short (1 cm at most) red and blakc wire coming out of the back of it with none of those spade things on it just plain wire. Anyone have any ideas on how to connect the horn up

[slighty_sykotic]

um... Join a spade terminal to the end of the wire?...

[haydo]

oh yeah true. Don't boss kits usually come with a spare?

[haydo]

Here's a picture of what i mean by the wires etc.

Would someone mind explaining to me what exactly I do to get the horn working cheers. This one is much different compared to one I had lst time round.

[IH8TEC]

is it second hand? solder some wire to it and heat shrink.

[haydo]

it's brand new. sorry do you mind elaborating lol

[postfach]

ok, looks like that ring thing in the first pic is gonna be your earth, so:

1) solder one wire to the black wire on the button, and put a spade terminal on the other end and put that onto the tab thing on that ring, then

2) take the wire from the boss kit and solder it to the red wire on your button

once you screw the wheel to the boss kit, the horn will work

guess i should mention you should cover the wires where you have soldered with heatshrink or electrical tape.

[postfach]

suppose you could use the second button for some sweet NOS action or to turn your neons on too...

[haydo]

Ended up just connecting both buttons to the horn and it worked. cheers for your help.

one more question how do you get the indicators to flick off automatically when i have completed the turn? i cant work out how