4age, 4agze turbo thread (General Discussion)

[Mr Revhead]

for an aw11 i reckon w2a would be hard to improve one
for a stocker a legacy one is fine, a GT4 one is better though

[Caveman]

Well looks like the stock c52 4age clutch sucks, im upgrading to an exedy button clutch. What do all you guys use?

[IH8TEC]

3 puck solid center with 1900lbs pressure plate. it's harsh for stop start traffic, but i don't care cause when it grips it grips and doesn't let go.

it's better after the drags though i must say, and the only shuddering is on initial taking off in 1st.

[Mr Revhead]

i supposedly use a stock cover and brass buttun puck plate. iv never had it out and thats what the guy who last did a clutch said wa sin there.
its certainly a lot faster on the uptake than a stock clutch

thats in a 9.4:1 4age running 8psi from a sc12

[Caveman]

Ive got an exedy 4 puk cermic plate with a heavy duty cover, not sure on weight but probably not 1900lb, I think they are about 50% stiffer than stock

[flygt4]

standard gze disc with a bit of extra clamping pressure

is only just starting to lose a bit of meat now , after 2 drag meets , 1 track day, 3 lengthy dyno sessions and 18 months of street abuse.

[CAMB01]

I'm using a brass button disc with a 1800lb pressure plate, pedal is quite heavy and is really bad in stop start traffic.
Never had any problems, but i am only running 10psi from a SC12.

[bluemaumau]

is anyone here running silvertop rods in there 4agte?

[ezy10s]

is anyone here running silvertop rods in there 4agte?

these are the same as ae101 ze rods

[bluemaumau]

well you learn something everyday. worth shotpeening them?

[matt dunn]

is anyone here running silvertop rods in there 4agte?

Yes me.