suggest me a daily driver, please

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby Distrb » Thu Aug 02, 2007 3:45 pm

altezza seats IMO are perfectly reflective of the type of car you are in. Which is a medium sized family car, that weighs lots, and has an engine that has enough go to pull its fat ar$e around.

it wont set the world on fire with its extremeness... just like the seats wont set your ar$e on fire.. hell i spent 8 hours in mine last saturday and i've got absolutely no complaints. Neither does my backside.

those seats pictured are exactly the same as mine, trim and all..
www.hccc.org.nz 1986 Fx-Gt; 1999 Altezza
User avatar
Distrb
Regular Poster
 
Posts: 4756
Joined: Thu Jan 23, 2003 4:23 pm
Location: Wellington

Postby fuel » Thu Aug 02, 2007 4:42 pm

Mmm, Boost wrote:Price up maintenance type stuff for V6 Mitsi's before buying one ;)


No worse than V6 Toyotas, Nissans, Mazdas etc

After owning two Mitsubishi V6's, and working in a parts job I can tell you Mitsubishi V6s are one of the cheaper V6s to maintain/get parts for. Try pricing up a head gasket set for a Mazda V6 and compare to a Mitsi V6, or any other V6 and you'll see which is the worst for spare parts.
LOUD NOISES!!!
User avatar
fuel
Toyspeed Member
 
Posts: 1532
Joined: Sun Jan 25, 2004 1:59 pm
Location: Brisbane Australia

Postby Mr Revhead » Thu Aug 02, 2007 4:47 pm

dude.... no way..... in my experience mitsis would be the dearest!
toyota service parts are cheap.
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby 2LTR Rona » Thu Aug 02, 2007 5:01 pm

Mr Revhead wrote:dude.... no way..... in my experience mitsis would be the dearest!
toyota service parts are cheap.


you price a FULL gasket set for a 2ltr V6 Prominent (Camry) then....I think you might be surprised at the RETAIL on those eh :lol:

providing its the right one i am thinking about :oops: :lol:
2002 Altezza, 1974 KE25

www.hccc.org.nz
User avatar
2LTR Rona
Toyspeed Member
 
Posts: 1903
Joined: Wed Aug 11, 2004 3:43 pm
Location: Wellington

Postby Defective » Thu Aug 02, 2007 5:25 pm

yeah, i had a diamante before my trueno, and yup, the gearbox poo'ed itself and 3k to repair it...

but even tho it was only a 2.5 non mivec one it still went all right... i seem to remember an ex-nelson toyspeed member's levin having trouble keeping up with it... :lol:

but yeah, even lowered it handled like a boat, but supremely comfy on the open road, and lots of cool gadgets, like auto lights, auto wipers, hidden compartment, factory tv, touch screen controls, heated electric seats, 10 disc stacker, 8 inch sub all factory....


and they are CHEAP as now....
id buy another one...
Defective
Toyspeed Member
 
Posts: 338
Joined: Sun Mar 16, 2003 6:00 pm
Location: Nelson

Postby Mr Revhead » Thu Aug 02, 2007 6:06 pm

2LTR Rona wrote:
Mr Revhead wrote:dude.... no way..... in my experience mitsis would be the dearest!
toyota service parts are cheap.


you price a FULL gasket set for a 2ltr V6 Prominent (Camry) then....I think you might be surprised at the RETAIL on those eh :lol:

providing its the right one i am thinking about :oops: :lol:


i reckon $202.31 is cheap!
anyway gasket set isnt normal service!

try cambelt parts.... not uncommon for the mitsi belt alone to cost more than the entire kit for a toyota 8O
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby rollaholic » Thu Aug 02, 2007 6:30 pm

doesnt toyota subsidse the cost of cambelt stuff on its cars to standardise pricing? takes a hit on the big ones, makes its money on the smaller more common ones...

eg i did a cambelt on a 4.3 lexus the other day, belt from giltraps was $75 retail, aftermarket was $205 trade price ex australia!
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby fuel » Thu Aug 02, 2007 9:40 pm

Yeah Toyota genuine parts on the whole are USUALLY cheaper than most other makes, not just Mitsubishi! Hyundai also subsidise their parts to get a standard price between the cars.

When talking aftermarket it's a different story though. I'm rebuilding my MIVEC 6A12 Mitsi V6 (not because it shat itself either... just because I wanted a fresh engine to start with) and head set is $180, rings are $100, water pump $75, cambelt $110, tensioners $120 all up, infact the most expensive part were the bearings which had to be ordered direct from Mitsubishi as ACL didn't make aftermarket bearings for my engine.

Last time I priced up a head gasket set for a 4A-GE 16V it was just as much as my Mitsi V6, which has two of everything!

Everything else for Mitsis is no more expensive than any other make - brake pads are often shared between the models (ie early Evo 1-4 brake pads are the same as Pajero and Diamante etc), oil/air filters, spark plugs, shocks etc are usually the normal typical price.
LOUD NOISES!!!
User avatar
fuel
Toyspeed Member
 
Posts: 1532
Joined: Sun Jan 25, 2004 1:59 pm
Location: Brisbane Australia

Postby BigDon » Fri Aug 03, 2007 2:04 pm

If you didnt want to go toyota and want to go to the dark side what about an Accord Euro or similar?
www.europeandirect.co.nz
1996 AE111 BZ-G: TRD equipped road legal Club Car (Manfeild 1.25s) (SOLD)
1995 AE111 BZ-G: Stereo and daily driver (SOLD)
2005 NZ New Evo 9 GT (specd to FQ360) daily driver
2012 NZ New Outlander VRX - V6 family wagon
User avatar
BigDon
Toyspeed Member
 
Posts: 348
Joined: Fri Nov 07, 2003 6:47 pm
Location: Wellington

Postby 2LTR Rona » Fri Aug 03, 2007 2:08 pm

Mr Revhead wrote:
2LTR Rona wrote:
Mr Revhead wrote:dude.... no way..... in my experience mitsis would be the dearest!
toyota service parts are cheap.


you price a FULL gasket set for a 2ltr V6 Prominent (Camry) then....I think you might be surprised at the RETAIL on those eh :lol:

providing its the right one i am thinking about :oops: :lol:


i reckon $202.31 is cheap!
anyway gasket set isnt normal service!

try cambelt parts.... not uncommon for the mitsi belt alone to cost more than the entire kit for a toyota 8O


Yep...that is cheap....must have been something else I was thinking about....for some weird reason I have $700~RRP for parts for the 2ltr V6 in those Camry's....its going to bug me for the rest of the weekend now :twisted: :lol:
2002 Altezza, 1974 KE25

www.hccc.org.nz
User avatar
2LTR Rona
Toyspeed Member
 
Posts: 1903
Joined: Wed Aug 11, 2004 3:43 pm
Location: Wellington

Postby Leon » Fri Aug 03, 2007 2:23 pm

2LTR Rona wrote:its going to bug me for the rest of the weekend now :twisted: :lol:

Get trollied on Saturday with a midget and a pirate.

That'll take your mind off it.
User avatar
Leon
Toyspeed Member
 
Posts: 6642
Joined: Wed Feb 26, 2003 6:27 pm
Location: Wellington

Postby Lloyd » Fri Aug 03, 2007 2:33 pm

Why not a late 90s Primera? For the price bracket you're looking at you could get damn near anything. Altezza would be a nice option though.

Peronsally I have to get a boring daily or I seem to want to spend money on it. Hence I'm driving a diesel Bluebird :lol: Having said that, it costs nothing to run. Gutless as hell but its only around town so doesn't matter.
User avatar
Lloyd
** Moderator **
 
Posts: 6195
Joined: Tue Oct 15, 2002 1:50 pm
Location: Dunedin

Postby Leon » Fri Aug 03, 2007 3:05 pm

Mazda SP20? Looks fast, but isn't really.
User avatar
Leon
Toyspeed Member
 
Posts: 6642
Joined: Wed Feb 26, 2003 6:27 pm
Location: Wellington

Postby perfk » Fri Aug 03, 2007 5:12 pm

Distrb wrote:those seats pictured are exactly the same as mine, trim and all..
after seeing yours they are different
so it's good to know I can get hold of nicer 'tezza seats to bolt in if required :)
User avatar
perfk
Toyspeed Member
 
Posts: 65
Joined: Mon Mar 12, 2007 3:25 pm
Location: wellington

Postby Boosted_162 » Fri Aug 03, 2007 5:29 pm

HRT wrote:Why not a late 90s Primera? For the price bracket you're looking at you could get damn near anything. Altezza would be a nice option though.

Peronsally I have to get a boring daily or I seem to want to spend money on it. Hence I'm driving a diesel Bluebird :lol: Having said that, it costs nothing to run. Gutless as hell but its only around town so doesn't matter.


Haha, i got a late 90's primera cos it stops me spending money on it :lol:. Mines a 97 Camino, its SR18DE auto, good on gas. Only cost $9500 from a dealer as well, only had 33000km on the clock. It is a basic car tho, its not the most comfortable car on the road, but it suits me fine.
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa

Postby Distrb » Fri Aug 03, 2007 5:39 pm

perfk wrote:
Distrb wrote:those seats pictured are exactly the same as mine, trim and all..
after seeing yours they are different
so it's good to know I can get hold of nicer 'tezza seats to bolt in if required :)


those ones pictured arent from the car you looked at anyway ;)
www.hccc.org.nz 1986 Fx-Gt; 1999 Altezza
User avatar
Distrb
Regular Poster
 
Posts: 4756
Joined: Thu Jan 23, 2003 4:23 pm
Location: Wellington

Previous

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 12 guests