TRD LSD v's Hilux LSD

[Mr Revhead]

Revhead- are the 41301-MZ201 units still available? seems to be according to the catalogue but could you check for me pleae dude.
these are the ones that fit into the G series head units.

one in stock at TNZ even

[ezy10s]

Sweet roll up people- trd G series LSD in stock!!!!
Ditch that doogy old toyota LSD and slap this 2way in- single spinners are a thing of the past! roll up roll up!!


damnit i wonder if you can put a cressida G series centre in a TA63 sub frame.....

[gepsk8]

Price? has any1 done it?

[ezy10s]

you be the first- bloody legend

[QikStarlie]

putting a supra g series lsd, in a hilux head at the moment. machining required. but should fit other than that

[gepsk8]

nice, let us know how u get on.

[ezy10s]

putting a supra g series lsd, in a hilux head at the moment. machining required. but should fit other than that

What machining you having to do?

[QikStarlie]

bearings are bigger on the supra one, and the part the bearing sits on. so wont fit stright in the hilux carier. could probably go to a helpfull bearing shop and find something to match. but im just going to spin the ends down and use the hilux bearings. since lathe is at hand

[ezy10s]

if you look at the trd lsd catalogue they say you need to run their special side bearings- this is a common thing and i had to sort this out with my F series TRD lsd when i bought it also.
The bearings are available form
Auckland Bearings LTD here on the shore(im sure most bearing shops also carry these). From memory i think trade cost set me back approx $50 for the pair.

[QikStarlie]

[QikStarlie]

Revhead- are the 41301-MZ201 units still available? seems to be according to the catalogue but could you check for me pleae dude.
these are the ones that fit into the G series head units.

one in stock at TNZ even

how much would one of them set ya back?

supra one = same issue as hilux. unless its all the masses of na power it cant handle..

[matt dunn]

supra one = same issue as hilux. unless its all the masses of na power it cant handle..

So you are saying the supra one is no good either?

Im thought the issue with the hilux one was it has no ramps at all,
so cannot even be improved much.

Does the supra one have ramps? Maybe the one you tested is just a weak one and may need a "tune up" so to speak

[Mr Revhead]

arnt the supra ones torsen?

[QikStarlie]

this one is clutch type. seems to be the same deal as the hilux one. i did spilt it in half, but really didnt take much notice other than a quick look at a couple of the plates for excessive wear then bolted it back together. wish i had of striped it right down, and had a better look now.
does just the same as what the hilux one does. works fine in a straight line, but when , how should i say it.. doing a "u-turn" it just spins the inside wheel.
has pretention but feels as tho it has no ramps like the hilux one. the case looks the same as the hilux one also.

[mjrstar]

The trd one will set you back about 1600 plus GST.

[QikStarlie]

has anyone used a modified hilux one from this dude? :

http://www.raeemersonmotorsportdevelopm ... parts.html

http://www.raeemersonmotorsportdevelopm ... luxlsd.jpg

1600+ for trd one sounds a bit harsh, retail?

[ezy10s]

Damian ran one of these in his ae86 while he owned it and Grant Hohaia runs one in his super GT ae86. reckon its money well spent

[QikStarlie]

ah sweet, damian told me about it ages ago. but wasnt sure if that was the place he got it from or not

[spencer]

surely the supra one just needs a rebuild pretty sure there 4 pinion over the hilux 2, and was sure they had the lock up ramps when we pulled apart a chaser one (same thing)

[QikStarlie]

yeh i dunno aye. just pulled the hilux one apart. looks just the same as what the supra one did. i'd have to take the other one apart again to be sure tho.
meh.