Caldina GTT Head

[Caldina3SGTE]

just wondering will a altezza 3sge head fit on a caldina 3sgte block?? if not, wht head will bolt stright on a caldina block?

[strx7]

its obvious why you'd want to bolt the twin vvti head on, but why any other head, has yours cracked or something? they are a reasonably good flowing head if you want to make more HP

[fivebob]

Any Gen III head would fit but you'd need the distributor and an aftermarket ECU to make it work.

Why would you want any other head? The stock 3S-GTE head is not a performance restriction.

[Caldina3SGTE]

just curious thats all, and yea kinda want the vvti, yea just got my caldina not to long ago and don't know that much about them thanks

[strx7]

if you wanna make it fly, change the pistons, change the turbo/manifold, do the rest of the usuals - cams, ECU, fuel pump, etc etc and you're good for over 400hp

as with most vehicles, the limit to the power is the depth of your pocket

[snwtoy]

if you wanna make it fly, change the pistons, change the turbo/manifold, do the rest of the usuals - cams, ECU, fuel pump, etc etc and you're good for over 400hp

as with most vehicles, the limit to the power is the depth of your pocket

That should say 'Do the ECU...' then everything else.

[caldinagtt]

pistons, rods, t70 turbo, manifold, fuel pump, fuel regulator, 870cc injectors, exhuast, 50mm wastgate, bov, intercooler, breather tank and a link has netted me 253.1 kws atw on 13.4 psi at 6174 rpm with 405.2 nm of torque