Opinions - series 1 rx7 kit

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby Skin » Tue Jan 22, 2008 4:20 pm

Yep, this

Image

Workmates car, series 2 rx7 with a 12a j port. Used to be my cousins car, so will be good to have it in the family again :wink:
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby Dell'Orto » Tue Jan 22, 2008 5:19 pm

Thats yuck :? Ditch modgays asap plzkthnxbi.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Simon K » Tue Jan 22, 2008 7:51 pm

Dell'Orto wrote: Ditch modgays asap plzkthnxbi.
Ditto :wink:
User avatar
Simon K
TS Wannabe
 
Posts: 1048
Joined: Thu May 30, 2002 6:06 pm
Location: Lambton quay perving...

Postby cogent » Tue Jan 22, 2008 8:20 pm

ahh i've seen that sev before on havik, trying to remember the plate.
cant say i ever really liked that lime greenish colour everyone chucks on sa22c's.

as long as you're happy with it though is all that really matters!
cogent
 

Postby scope » Wed Jan 23, 2008 8:03 am

you can sell the modgies to me :D
chicken fillet and bacon with everything except onion and bbq, ranch and southwest sauces
-
current ride: 1980 mazda rx7 series 1
previous rides: ke36 corolla, series 1 rx7, ke30 corolla, ke70 corolla x2
scope
Toyspeed Member
 
Posts: 1191
Joined: Mon Nov 22, 2004 2:29 pm
Location: christchurch au

Postby SIKBUZ » Wed Jan 23, 2008 9:07 am

Looks pretty straight.. How does it go?

Lol the modgies don't look bad on it!!!
User avatar
SIKBUZ
Toyspeed Member
 
Posts: 230
Joined: Thu Sep 06, 2007 1:28 pm

Postby -Dan-Knee- » Wed Jan 23, 2008 9:58 am

In my opinion....

Done a lil photoshoppin haha...

Image
Image

Better colour and sacked it right out haha.....

SIKBUZ wrote:Looks pretty straight.. How does it go?

Lol the modgies don't look bad on it!!!


Agreed!
Image
User avatar
-Dan-Knee-
Toyspeed Member
 
Posts: 498
Joined: Thu Aug 28, 2003 5:30 pm
Location: Wellywood!!

Postby Skin » Wed Jan 23, 2008 10:43 am

Ha ha i love modgies on it!! And I think the colour is great. Not into aqua danny!! :P

Its just all over really well done. Will get some better pics of it once i get back from aussie
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby SIKBUZ » Wed Jan 23, 2008 10:57 am

Skin wrote:Ha ha i love modgies on it!! And I think the colour is great. Not into aqua danny!! :P

Its just all over really well done. Will get some better pics of it once i get back from aussie


Wicked.. When are you off?
User avatar
SIKBUZ
Toyspeed Member
 
Posts: 230
Joined: Thu Sep 06, 2007 1:28 pm

Postby Skin » Wed Jan 23, 2008 11:41 am

Friday morning!! :) Lets hope the weather on the gold coast has gotten better
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby Skin » Thu Feb 21, 2008 9:21 pm

Well after all that, I just couldnt give up on the bats.

So I've bought this instead :lol:

Image

Image
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby rollaholic » Fri Feb 22, 2008 7:02 am

good call imo.

just dont paint it homo green.
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby barryogen » Fri Feb 22, 2008 8:27 am

apart from needing a good clean, that looks nice and tidy.
User avatar
barryogen
2ZZ Guru in training
 
Posts: 2692
Joined: Thu Oct 13, 2005 8:38 am
Location: Dunedin

Postby ~SlideWays~ » Fri Feb 22, 2008 8:36 am

They are just plain sex. Leave body as standard please!

So how much do you have to pay for one these days? New import? Need engine rebuild at all?
User avatar
~SlideWays~
Toyspeed Member
 
Posts: 4974
Joined: Sat Nov 23, 2002 3:02 am
Location: Wellington

Postby Skin » Fri Feb 22, 2008 9:25 am

~SlideWays~ wrote:They are just plain sex. Leave body as standard please!

So how much do you have to pay for one these days? New import? Need engine rebuild at all?


agreed, body wise it will be staying as is, bar the rear spoiler being removed and probably dropping it down a bit more - HKS adjustables FTW!!!

And i have already taken the guesswork about whether or not it needs a rebuild - it does. Bought it for that reason. Will either chuck another block in, or more likely rebuild that one. It only cost me $10k, and a going series 7 is around the $15k-$18k so its good value. It is a fresh import, but its all complied and even has a LVVC for the suspension.

I should get it tuesday, its coming up from welly
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby ~SlideWays~ » Fri Feb 22, 2008 9:51 am

Skin wrote:
~SlideWays~ wrote:They are just plain sex. Leave body as standard please!

So how much do you have to pay for one these days? New import? Need engine rebuild at all?


agreed, body wise it will be staying as is, bar the rear spoiler being removed and probably dropping it down a bit more - HKS adjustables FTW!!!

And i have already taken the guesswork about whether or not it needs a rebuild - it does. Bought it for that reason. Will either chuck another block in, or more likely rebuild that one. It only cost me $10k, and a going series 7 is around the $15k-$18k so its good value. It is a fresh import, but its all complied and even has a LVVC for the suspension.

I should get it tuesday, its coming up from welly


So rebuild is roughly $5k? That is good value! Does that sort of thing come up very often at this price? Did this sneak in before the import changes or are they not effected?

I WANT...
User avatar
~SlideWays~
Toyspeed Member
 
Posts: 4974
Joined: Sat Nov 23, 2002 3:02 am
Location: Wellington

Postby Skin » Fri Feb 22, 2008 10:07 am

~SlideWays~ wrote:
Skin wrote:
~SlideWays~ wrote:They are just plain sex. Leave body as standard please!

So how much do you have to pay for one these days? New import? Need engine rebuild at all?


agreed, body wise it will be staying as is, bar the rear spoiler being removed and probably dropping it down a bit more - HKS adjustables FTW!!!

And i have already taken the guesswork about whether or not it needs a rebuild - it does. Bought it for that reason. Will either chuck another block in, or more likely rebuild that one. It only cost me $10k, and a going series 7 is around the $15k-$18k so its good value. It is a fresh import, but its all complied and even has a LVVC for the suspension.

I should get it tuesday, its coming up from welly


So rebuild is roughly $5k? That is good value! Does that sort of thing come up very often at this price? Did this sneak in before the import changes or are they not effected?

I WANT...


Nah, will be a lot less than that. Me and a mate will do the rebuild ourselves. From what it sounds like the internals should be fine, and i can get a complete rebuild kit for $1300. So hopefully the car shouldnt owe me more than $12k all up. At worst case i can get a brand new crate long block from mazda for $4000.

Get one!!!!
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby ~SlideWays~ » Fri Feb 22, 2008 10:18 am

I didn't know you could get crate blocks? Is that normal price or hook up?

Im tempted eh. But not for a while so hopefully deals like that are still around if the import laws stop that sort of thing coming in.

I wouldn't want a ported engine or anything, just a healthy 350hp if thats do-able with the standard turbo crate engine?
User avatar
~SlideWays~
Toyspeed Member
 
Posts: 4974
Joined: Sat Nov 23, 2002 3:02 am
Location: Wellington

Postby Skin » Fri Feb 22, 2008 10:41 am

~SlideWays~ wrote:I didn't know you could get crate blocks? Is that normal price or hook up?

Im tempted eh. But not for a while so hopefully deals like that are still around if the import laws stop that sort of thing coming in.

I wouldn't want a ported engine or anything, just a healthy 350hp if thats do-able with the standard turbo crate engine?


Yep that sort of power is a piece of piss on a standard engine. SIKBUZ is making close to that on stock turbos and a power fc and only 10psi. Thats my goal power as well, and im just going to be using a series 8 computer

That is a hook up price, but as always its who you know, not what you know.
cogent wrote:iPhones can eat a dick.


1981 Mazda RX7
1997 Toyota Corolla
User avatar
Skin
Toyspeed Member
 
Posts: 1438
Joined: Wed Oct 16, 2002 12:33 pm
Location: Perth, aussieland

Postby cogent » Fri Feb 22, 2008 1:17 pm

boes send me those HKS spanners when you're done!
copy cat!

same wheels
same year
same colour
same suspension
same body mods (wing delete)

oh wait, my one actually goes :lol:
cogent
 

PreviousNext

Return to General Car Discussion

Who is online

Users browsing this forum: Majestic-12 [Bot] and 6 guests